№ lp_1_13510
File format: docx
Character count: 11465
File size: 102 KB
This document outlines the procedures and requirements for a proficiency test aimed at forensic laboratories to evaluate their analysis of ignitable fluid residues in fire investigation scenarios.
Year:
2025
Region / City:
Victoria, Australia
Subject:
Forensic science, proficiency testing, arson investigations
Document type:
Proficiency test, forensic analysis guide
Institution:
Forensic Foundations International
Author:
Forensic Foundations International
Target Audience:
Forensic laboratories and professionals
Period of validity:
Until the final report is released in April 2026
Approval date:
2025
Date of changes:
N/A
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Organization:
North Carolina Department of Environmental Resources
Division:
Division of Water Resources
Program:
Wastewater/Groundwater Laboratory Certification
Document type:
Laboratory compliance checklist
Analyte:
Residue, Suspended (Aqueous)
Method reference:
Standard Methods 2540 D-2015
Regulatory references:
40 CFR Part 136; 15A NCAC 2H .0805
Jurisdiction:
North Carolina
Subject area:
Water and wastewater analysis
Intended users:
Certified environmental laboratories
Equipment scope:
Filtration, drying, and gravimetric measurement apparatus
Quality system elements:
SOP review, quality assurance, quality control, documentation
Sample handling requirements:
Preservation, storage, holding time
Measurement range:
2.5–200 mg/L
Reporting limit basis:
Minimum weight gain and sample volume
Year:
2018
Region / City:
Gladstone, Queensland, Australia
Theme:
Bauxite Residue Management, Environmental Technology
Document Type:
Technical Report
Organization:
Queensland Alumina Limited, Rusal Australia
Author:
Benoit CRISTOL, Ross GREENHALGH
Target Audience:
Environmental engineers, industry professionals
Period of Validity:
Until 2080
Approval Date:
2007
Modification Date:
Not specified
Technology:
Sea water neutralisation for bauxite residue disposal
Environmental Impact:
Improved water quality release, reduced leachate treatment post-closure
Process Description:
Thickening, mud farming, and wall construction
Storage Capacity:
Up to 2082
Water Quality:
pH between 8.5 and 9.0, dissolved oxygen 5mg/L, suspended solids <10mg/L
Residue Management Strategy:
Thickening, high-density mud consolidation, upstream wall construction
Year:
2016
Region / City:
Naivasha, Kenya
Topic:
Maximum Residue Levels (MRLs) in Tea
Document Type:
Report
Organization / Institution:
FAO-IGG
Author:
Working Group on MRLs in Tea
Target Audience:
Governments, regulatory bodies, tea producers, trade organizations
Period of Validity:
Ongoing
Approval Date:
27 May 2016
Date of Amendments:
Not specified
Year:
2016
Region / City:
Naivasha, Kenya
Theme:
Maximum Residue Levels (MRLs) in Tea, International Tea Trade
Document Type:
Report
Author:
Intergovernmental Group on Tea (IGG/Tea)
Target Audience:
Tea producers, exporters, and researchers
Period of Action:
1990s–present
Approval Date:
Not specified
Date of Changes:
Not specified
Year:
2014
Region / City:
Bandung, Indonesia
Topic:
Maximum Residue Levels in Tea
Document Type:
Report
Organization:
FAO-IGG on Tea
Author:
FAO-IGG Working Group
Target Audience:
Stakeholders in the tea trade, regulatory authorities
Period of Validity:
2014
Approval Date:
5-7 November 2014
Date of Modifications:
May 2014
Year:
2025
Region / city:
Australia
Topic:
Greenhouse gas emissions estimation and reporting for agriculture, fisheries, and forestry
Document type:
Methodological guidelines
Institution:
Department of Climate Change, Energy, the Environment and Water
Author:
Department of Climate Change, Energy, the Environment and Water
Target audience:
Professionals and organizations involved in greenhouse gas estimation and reporting
Effective period:
2025 and beyond
Approval date:
February 2025
Modification date:
Not specified
Year:
2018
Region / City:
New Zealand
Topic:
Food Safety, Agricultural Compounds, Maximum Residue Levels
Document Type:
Notification
Agency:
Ministry for Primary Industries
Author:
Ministry for Primary Industries
Target Audience:
WTO Members, Trading Partners
Period of Validity:
Not specified
Date of Approval:
Not specified
Date of Changes:
Not specified
Year:
2012
Region / City:
Gastonia, NC
Topic:
Pesticide residue analysis
Document type:
Research report
Agency / Institution:
USDA, AMS
Author:
Not specified
Target audience:
Researchers, agricultural professionals
Period of validity:
Not specified
Approval date:
Not specified
Modification date:
Not specified
Note:
Summary
Year:
2024
Jurisdiction:
Australia and New Zealand
Subject:
Maximum residue limits for agricultural and veterinary chemicals in food
Document type:
Explanatory statement to a legislative instrument
Related legislation:
Food Standards Australia New Zealand Act 1991; Legislation Act 2003; Legislation (Exemptions and other Matters) Regulation 2015
Issuing body:
Food Standards Australia New Zealand (FSANZ)
Proposal number:
M1022
Amended instrument:
Australia New Zealand Food Standards Code, Schedule 20
Consultation period:
16 September 2024 – 6 weeks
Approval body:
Food Ministers’ Meeting
Commencement:
On date of gazettal
Legal status:
Legislative instrument not subject to disallowance or sunsetting
Publication register:
Federal Register of Legislation
Year:
2022
Region / City:
Australia
Topic:
Maximum Residue Limits for Agricultural and Veterinary Chemicals
Document Type:
Approval Report
Organization / Institution:
Food Standards Australia New Zealand (FSANZ)
Author:
FSANZ
Target Audience:
Stakeholders in food safety, regulatory bodies, agricultural and veterinary sectors
Action Period:
2021-2022
Approval Date:
8 June 2022
Decision Notification Date:
16 June 2022
Amendments Date:
8 June 2022
Year:
2022
Region / city:
Japan
Subject:
Agricultural chemical residue standards
Document type:
Notification
Agency / organization:
Ministry of Agriculture, Forestry and Fisheries (MAFF)
Author:
National Enquiry Point, Ministry of Foreign Affairs
Target audience:
Trading partners
Period of validity:
Not specified
Approval date:
Not specified
Amendment date:
Not specified
Year:
2023
Region / City:
Minnesota
Subject:
Residue and Tillage Management
Document Type:
Practice Worksheet
Organization / Institution:
Natural Resources Conservation Service (NRCS)
Author:
NRCS
Target Audience:
Agricultural producers
Effective Period:
One year
Approval Date:
Not specified
Amendment Date:
Not specified
Practice Lifespan:
1 year
Practice Code:
329
Crop Types:
Not specified
Soil Tillage Intensity Rating (STIR):
Must be <20
Residue Management Requirements:
Residue should be uniformly distributed, no burning, and no full-width tillage
Certification:
Producer self-certification required
Note:
Description
Issuing body:
Department of Agriculture
Document type:
Procurement solicitation
Subject:
Gas Chromatograph – Mass Spectrometer (GC-MS/MS)
Purpose:
Detection of pesticide residue from open environment sampling
Equipment specifications:
MS/MS resolution up to 30,000 at m/z 200; vacuum interlock; modular GC injectors and detectors; electron, positive and negative chemical ionization
Required components:
Mainframe; autosampler for liquid injection; programmable temperature vaporizing injector module; start-up kit; injector essentials kit; minimum 6 kVA uninterruptible power supply; power distribution unit
Software requirements:
Tracefinder 5.1 (or comparable); Compound Discoverer 3.3 (or comparable); Merkur Countkit (or comparable)
Support and warranty:
Minimum 3 days on-site GC/GCMS support; extended warranty with on-site corrective maintenance; annual preventive maintenance; priority technical support
Additional requirements:
On-site corrective maintenance for autosampler and injector module; factory certified replacement parts; three business day response time; power cords for all equipment
Year:
February 2016
Region / city:
Not specified
Subject:
Metabolism and distribution of residues in plants and livestock
Document type:
Technical report
Organization:
Not specified
Author:
Not specified
Target audience:
Scientific researchers, agronomists
Period of validity:
Not specified
Approval date:
Not specified
Date of amendments:
Not specified
Year:
2026
Region / City:
Halle, Germany; Bayreuth, Germany; Rudolstadt, Germany; Karlsruhe, Germany; Eggenstein-Leopoldshafen, Germany
Topic:
X-ray microscopy, fluid flow simulations, block copolymer synthesis, filtration materials
Document type:
Research study
Institution / Organization:
Martin Luther University of Halle-Wittenberg, University of Bayreuth, Karlsruhe Institute of Technology, Fraunhofer Institute for Microstructure of Materials and Systems IMWS
Author:
Murilo I. Santos, Juliana Martins de S. e Silva, Daina Damberga, Markus Langner, Rafaela Debastiani, Ulrike Hirsch, Andreas Greiner, Ralf B. Wehrspohn
Target audience:
Researchers, scientists in the fields of material science, polymer chemistry, and filtration technology
Date of approval:
2026
Date of changes:
Not specified
Context:
Research study focused on the synthesis and characterization of block copolymers and the visualization of filtration materials using X-ray microscopy and fluid flow simulations.
Year:
2011
Region / City:
Philadelphia, PA
Topic:
Clinical diagnostics
Document Type:
Clinical reference
Organization / Institution:
Elsevier Saunders
Author:
Karcher DS, McPherson RA, Jacobs DS, DeMott WR, Oxley DK, Burgess LJ, Reuter H, Taljaard JJF, Doubell AF, Meyers DG, Meyers RE, Prendergast TW, Ben-Horin S, Shinfeld A, Kachel E, Chetrit A, Livneh A, Runyon BA, Hoefs JC, Block DR, Franke DDH, Light RW, MacGregor MI, Luchsinger PC, Ball WC, Porcel JM, Pejovic M, Stankovic A, Mitrovic DR, Margaretten ME, Kohlwes J, Moore D, Bent S, Couturier MR, Straseski JA, Kjeldsberg CR, Shmerling RH, Delbanco TL, Tosteson ANA, Trentham DE
Target Audience:
Medical professionals
Effective Date:
2011
Revision Date:
2012
Year:
2026
Organization:
TI Fluid Systems
Document Type:
Work Instruction
Scope:
Internal and external suppliers for manufacturing sites
Subject:
Production Part Approval Process (PPAP)
Related Standards:
AIAG PPAP, IATF 16949, APQP
Responsible:
Global Director Corporate Quality Systems
Target Audience:
TI Fluid Systems associates and suppliers
Submission Language:
English
Submission Levels:
1–5, Prototype
References:
CP-8-ALL-05, CF-8-ALL-0500, CF-8-ALL-0510, AIAG Manuals