№ lp_1_2_36949
File format: docx
Character count: 18329
File size: 59 KB
Regulatory compliance checklist defining required laboratory practices, equipment, sample handling, analytical procedures, documentation, and reporting criteria for determination of suspended residue in aqueous samples under federal and North Carolina regulations.
Organization:
North Carolina Department of Environmental Resources
Division:
Division of Water Resources
Program:
Wastewater/Groundwater Laboratory Certification
Document type:
Laboratory compliance checklist
Analyte:
Residue, Suspended (Aqueous)
Method reference:
Standard Methods 2540 D-2015
Regulatory references:
40 CFR Part 136; 15A NCAC 2H .0805
Jurisdiction:
North Carolina
Subject area:
Water and wastewater analysis
Intended users:
Certified environmental laboratories
Equipment scope:
Filtration, drying, and gravimetric measurement apparatus
Quality system elements:
SOP review, quality assurance, quality control, documentation
Sample handling requirements:
Preservation, storage, holding time
Measurement range:
2.5–200 mg/L
Reporting limit basis:
Minimum weight gain and sample volume
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Document type:
Standard Operating Procedure
Subject area:
Water quality monitoring
Parameters measured:
Turbidity; Total Suspended Solids
Measurement units:
NTU; FNU; mg/L
Measurement methods:
Nephelometry; In situ optical sensing
Instrumentation:
Turbidimeter; Nephelometer; Infrared turbidity probes; In-line TSS sensors
Applicable standards:
FT 1610; FT 1620; FT 1630; Standard Methods 2130B (2011)
Applicable facilities:
Domestic wastewater treatment facilities
Regulatory references:
Rule 62-610.320, F.A.C.
Monitoring context:
Field measurements; Continuous monitoring; Screening measurements
Calibration requirements:
Instrument calibration and verification required
Source type:
Technical procedure documentation
Year:
2021
Region / City:
United States
Topic:
Pension Plans
Document Type:
Legal Amendment
Organization / Institution:
Pension Benefit Guaranty Corporation
Author:
Board of Trustees of the [PLAN NAME]
Target Audience:
Plan sponsors, trustees, and pension plan participants
Effective Date:
[Date of special financial assistance payment]
Date of Approval:
[Date of Execution]
Date of Last Revision:
[Date of Execution]
Note:
Year
Subject:
Occupational Health and Safety
Document Type:
Worksite Safety Form
Organization:
Ministry of Labour
Target Audience:
Employers, Contractors, Site Supervisors, Safety Personnel
Year:
2005
Region / City:
Victoria, Australia
Topic:
Criminal Law, Sentencing
Document Type:
Discussion Paper
Author:
Sentencing Advisory Council
Target Audience:
General Public, Legal Professionals, Community Members
Period of Validity:
2005
Approval Date:
N/A
Date of Changes:
N/A
Context:
A discussion paper that explores the use of suspended sentences in the Victorian criminal justice system, inviting public submissions for reform options.
Note:
Year
Certification:
CE, TÜV GS, ETLATEX certification for Model TSS Ex1 sc: 94/9/EC, ATEX Directive, CE 0035 // IBExU 09ATEX1156, CE certified to EN 61326-1:2006-05
Environmental Requirements:
Flow rate: 3 m/s (9.8 ft./s) maximum
Warranty:
The product includes a 24 month warranty, extendable to 5 years fulfilling the requested servicing intervals.
Maintenance Service:
Scheduled maintenance: 1. Clean measurement windows: monthly 2. Check calibration: monthly (depending on the environmental conditions)
Context:
Technical specification document for turbidity and suspended solids measurement equipment, including product details, environmental requirements, installation instructions, and maintenance guidelines.
Scheme:
Local Government Pension Scheme (LGPS)
Regulations Referenced:
LGPS (Benefits, Membership and Contributions) Regulations 2007 (as amended); LGPS (Administration) Regulations 2008 (as amended); Pensions (Increase) Act 1971; Medical Act 1983
Regulation Provisions:
Regulation 20; Regulation 31; Regulation 56
Applicable Members:
Tier 3 pensioners whose pension is suspended and who left before 1 April 2014
Review Timing:
3 or more years after cessation of tier 3 pension and before normal retirement age
Normal Retirement Age:
65 (with specified protected exceptions)
Medical Authority Requirement:
Independent approved registered medical practitioner (IRMP) registered with the General Medical Council and holding required occupational health qualifications
Employer Responsibilities:
Completion of Part A and Part D; formal determination regarding reinstatement of suspended pension
Medical Practitioner Responsibilities:
Completion of Part B and Part C; certification of permanent incapacity for gainful employment; attachment of full medical report
Definition of Gainful Employment:
Paid employment of at least 30 hours per week for not less than 12 months
Form Structure:
Part A (Employer); Part B (Medical Certification); Part C (Practitioner Declaration); Part D (Employer Determination); Explanatory Notes
Review Date of Notes:
March 2020
Jurisdiction:
United Kingdom
Year:
2021–2022
Region:
United States
Document Type:
Regulatory Report
Subject:
ABP Entity Suspensions
Entity Type:
Approved Vendor, Designee, Third-party marketing/sales firm
Issuing Organization:
Illinois Power Agency (IPA)
Suspension Reasons:
Misleading information, non-responsiveness to customers, failure to comply with Program Guidelines, failure to register as Designee, bankruptcy notification violations
Suspension Status:
Suspended (various durations, some indefinite)
Appeal Status:
Denied or Not Submitted
Start Dates:
07/15/2021–05/24/2022
End Dates:
11/09/2021–08/24/2022 (some indefinite)
Affected Entities:
WindSoleil Incorporated, Energy of Illinois, Inc., Midwest United Solar LLC, Eco-Solar Solutions, LLC, Standard Eco, LLC, Empire Solar Group, LLC, Eco-Energy Solutions, Inc., Power Home Solar LLC, Solarize South Carolina, LLC
Document Type:
Risk assessment and workplace safety procedure
Activity:
Install and dismantle a suspended work platform system
Subject:
Hazard identification, risk evaluation, and control measures for construction activities
Industry:
Construction and occupational health and safety
Risk Assessment Method:
Frequency, Probability, Severity (FxPxS) risk rating system
Hazard Categories:
Motor vehicle interaction, falling objects, work area access
Control Measures:
Physical barriers, signage, restricted access, coordination with site supervisor, scaffold hoarding, mesh enclosure, lighting
Monitoring Method:
Daily monitoring, supervision, communication with suppliers and site personnel
Residual Risk Evaluation:
Risk recalculated after implementation of control measures and compared to defined threshold levels
Risk Threshold Levels:
Low Risk (1–19), Medium Risk (20–39), High Risk (40–64)
Safety References:
Safe Work Procedures SWP 003 Backing Vehicles; SWP 004 Securing Work Area
Intended Users:
Site supervisors, construction workers, safety personnel
Safety Objective:
Identification and reduction of workplace hazards during platform installation and dismantling activities