№ files_lp_4_process_2_84848
File format: docx Character count: 107936 File size: 804 KB
Comprehensive scientific review covering research and developments in electrodeposition of Ni-P composite coatings with ceramic and polymeric particles, including deposition mechanisms, bath parameters, particle inclusion, and resulting mechanical, tribological, and electrochemical properties.
Year: 2018
Region / city: International
Subject: Materials Science; Surface Engineering; Electrochemical Coatings
Document type: Review article
Institution: Surface & Coatings Technology Journal; Artia Nanoengineering & Consulting; University of Southampton
Authors: Aleksandra Lelevic, Frank C. Walsh
Intended audience: Researchers and engineers in materials science and electrochemistry
Keywords: Ni-P coatings, electrodeposition, composite materials, tribology, electrochemical properties
Document length: Approx. 18,000 words, 10 reactions/equations, 1 table, 13 figures, 150 references
Abstract focus: Mechanical, tribological, electrochemical properties of Ni-P coatings with included particles
Date of publication: December 8, 2018
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Supporting InformationPolymeric Ionomer-Mediated Electrodeposition of Mn(OH)2 Nanonets on Carbon Nanofibers toward Enhanced Electrochemical Performance
Year: Not specified
Region / city: Seoul, Republic of Korea
Topic: Electrochemistry, Nanotechnology
Document type: Research paper
Institution: Ewha Womans University, Jeonbuk National University
Author: Yeji Yim, Myung Hwa Kim, Dasol Jin
Target audience: Researchers, Academics
Period of validity: Not specified
Approval date: Not specified
Modification date: Not specified
A Performance Comparison of Popular Cup Coatings for the Prevention of Particle Bounce in Next Generation Impactors Using Imaging Techniques and HPLC Analysis
Year: 2021
Region / City: Sandwich, Kent, United Kingdom
Topic: Inhaler technology, particle re-entrainment, coating substrates
Document Type: Research Study
Organization / Institution: Inhalytic LTD, Canterbury Christ Church University
Author: Kelsey Cairns, Frank Chambers, Dr. Lee Byrne
Target Audience: Researchers, pharmaceutical professionals
Period of Validity: N/A
Approval Date: N/A
Date of Changes: N/A
Model Rule Architectural and Industrial Maintenance (AIM) Coatings
Year: 2011
Region / City: OTC
Topic: Environmental Regulations
Document Type: Model Rule
Organization: Ozone Transport Commission
Author: Ozone Transport Commission
Target Audience: Regulatory agencies, coating manufacturers, and suppliers
Effective Date: January 1, 2014
Amendments Date: June 21, 2011
Traffic Coatings
Year: 1938
Region / City: Greater Los Angeles, CA
Subject: Resinous Flooring, Traffic Coatings, Waterproofing
Document Type: Technical Specification
Organization: Crossfield Products Corporation
Author: Crossfield Products Corporation
Target Audience: Specifiers, Contractors, Architects
Period of Validity: Not specified
Approval Date: Not specified
Date of Amendments: Not specified
Experimental study of the influence of topcoat on insulation performance of intumescent coatings for steel structures
Note: Year
Rehabilitation of Underground Structures with Epoxy Coatings
Note: Year
Section 09 67 23 Resinous Flooring and Coatings – Dex-O-Tex Cheminert K
Section Number: 09 67 23
Title: Resinous Flooring and Coatings – Dex-O-Tex Cheminert K
Product Name: Dex-O-Tex Cheminert K
Manufacturer: Crossfield Products Corporation
Manufacturer Addresses: 3000 E. Harcourt Street, Rancho Dominguez, CA 90221; 140 Valley Road, Roselle Park, NJ 07204; 128 Industrial Drive, Cibolo, TX 78108
Contact Information: Phone 310-886-9100; Fax 310-886-9119; Email [email protected]
Note: ; Web www.dexotex.com
Type of Document: Construction specification section
Subject: Epoxy flooring and high density troweled epoxy flooring systems
Related Sections: 03 30 00 Cast-in-Place Concrete; 03 54 00 Cast Underlayment; 07 14 00 Fluid-Applied Waterproofing; 09 61 00 Vapor Control for Flooring; 22 40 00 Plumbing Fixtures
Referenced Standards: ASTM; ACI; ANSI; ICRI; NFPA; SSPC; MIL
Submittals Required: Product Data; Verification Samples; Shop Drawings; Contractor Certification; VOC Emissions Certification; Care and Maintenance Data
Quality Assurance Requirements: ISO-certified manufacturer; SSPC-certified inspector; minimum experience requirements for manufacturer and installer
Material Requirements: Epoxy resins, primers, hardening agents, finish or sealing coats from single source
Concrete Requirements: Minimum 28-day cure; compliance with ASTM C 309 or ASTM C 1315; specified moisture vapor emission limits
Pedestrian Traffic Coatings Specification for Section 07 18 13
Year: 2026
Region / City: United States
Subject: Construction Materials / Waterproofing
Document Type: Technical Specification
Organization / Agency: U.S. Government Construction Contract
Author: Not specified
Target Audience: Contractors and Installers
Application Area: Light pedestrian and recreational surfaces
Warranty Period: 5 years minimum
Standards Referenced: ASTM C794-18, D412-16, D2240-15e1, E96/E96M-16
Submittals Required: Manufacturer literature, samples, installer qualifications, manufacturer warranty
Environmental Requirements: Temperature, humidity, and surface condition specifications
Safety Requirements: Flammable material handling and spark avoidance
PEDestrian Traffic Coatings for Plywood Surfaces – Division 7 Thermal and Moisture Protection
Year: 2023
Region / City: Los Angeles, California, USA
Topic: Construction specifications for pedestrian traffic coatings
Document Type: Technical specification
Organization / Institution: Westcoat Specialty Coatings
Author: Not specified
Intended Audience: Contractors, applicators, architects, and project managers
Applicable Standards: ASTM E96, ASTM C297, ASTM D756, ASTM D1242, ASTM D570, ASTM D3746, ASTM C67, ASTM E84, ASTM D2299, ASTM E108, ASTM E119, ASTM C1028-96, ASTM C109, ASTM C190, ASTM 2726-12a, ASTM E2632
Submittals Required: Product data, selection samples, pre-application meeting
Warranty Period: 5 years
Project Site Conditions: Temperature and weather controlled as per manufacturer guidelines
Manufacturer Contact: Westcoat Specialty Coatings, 4007 Lockridge Street, San Diego, CA 92102, USA
Warranty Information Form for Construction Materials and Coatings
Year: 2026
Region / City: Not specified
Subject: Warranty for construction materials and coatings
Document Type: Warranty form
Organization / Institution: Lymtal
Author: Not specified
Target Audience: Project owners, applicators, engineers, distributors
Effective Period: 5 years
Effective Date: Not specified
Materials Covered: Coatings, sealants, expansion joints, sealers
Approval: President
E4E Product Guide: Polyaspartic and Vapor Barrier Coatings
Year: 2026
Region / City: N/A
Subject: Polyaspartic Coatings, Vapor Barrier Coatings
Document Type: Product Guide
Organization: E4E
Author: N/A
Target Audience: Industrial and commercial facilities
Period of Validity: N/A
Approval Date: N/A
Date of Modifications: N/A
Description: E4E Product Guide provides detailed information about various polyaspartic and vapor barrier coatings, including their features, advantages, and usage in industrial and commercial applications.
Enhancing the postharvest quality of Indian jujube (Ziziphus mauritiana) using aloe vera gel and ascorbic acid-based edible coatings
Year: 2024
Region / City: Sylhet, Bangladesh
Subject: Postharvest preservation of fruits
Document Type: Research article
Institution: Local agricultural research laboratory
Author: Not specified
Target Audience: Researchers, horticulturists, food scientists
Study Period: 15 days of storage
Date of Experiment: Not specified
Key Materials: Aloe vera gel, Ascorbic acid, Indian jujube
Parameters Measured: Weight loss, Total soluble solids, pH, Titratable acidity, Ascorbic acid content, Total phenolic content, Total antioxidant activity
Topics: Ni-P Electrodeposition Coatings