№ files_lp_3_process_9_45578
File format: docx
Character count: 7718
File size: 37 KB
Structured unit standard detailing the competencies required for planning, operating, maintaining, and relocating hydraulic excavators in compliance with safety and legal requirements within heavy equipment operations.
Unit ID:
1126
Domain:
Heavy Equipment Operations
Level:
3
Credits:
30
Purpose:
Plan, operate, and maintain hydraulic excavators according to safety and operational standards
Prerequisite:
Unit 1113 - Comply with health, safety and environmental rules and regulations pertaining to heavy equipment operations
Equipment Type:
Hydraulic excavator (wheeled or tracked)
Main Activities:
Pre-use checks, start-up, operational activities, relocation, documentation, clean-up
Safety Requirements:
Compliance with Labour Act No. 11 of 2007, Occupational Health and Safety Regulations No. 18 of 1997, and workplace policies
Quality Assurance:
Accredited by Namibia Qualifications Authority and Namibia Training Authority
Date First Registered:
27 March 2013
Review Body:
Namibia Training Authority
Anticipated Review:
Not specified
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Year:
2025
Note:
Region / City
Topic:
Excavator operation and safety
Document Type:
Competency verification
Organization / Institution:
Big Cat Earthmoving
Author:
Phillip Teacher
Target Audience:
Excavator operators
Year:
2026
Region / City:
Kennedy Space Center
Topic:
Space exploration, Lunar excavation
Document type:
Technical report
Organization:
NASA
Target audience:
Engineers, researchers, space exploration professionals
Period of validity:
N/A
Approval date:
N/A
Modification date:
N/A
Experiment size:
Small, Medium, Large
Test variables:
Linear excavation speed, Cutting depth
Methodology:
Rotational force measurement, Excavation simulation
Description:
Technical report detailing the experimental results of scaling bucket drums for lunar regolith excavation.
Unit ID:
HPE2
Domain:
Heavy Equipment Operations
Level:
4
Credits:
15
Purpose:
Train individuals in planning, operating, and managing excavation and loading tasks with an excavator
Prerequisite:
Unit 1113 - Comply with health, safety and environmental rules and regulations pertaining to heavy equipment operations
Equipment:
Hydraulic excavators (wheeled or tracked), plant, tools, fuel, lubricants, attachments
Regulations:
Labour Act No. 11 of 2007; Occupational Health and Safety Regulations No. 18, 1997; industry-specific codes of practice
Quality Assurance:
Accreditation by Namibia Qualifications Authority and Namibia Training Authority; compliance with national assessment and moderation requirements
Performance Elements:
Planning and preparation, demonstrating understanding, excavation and loading, document completion, work area cleanup
Worksite Conditions:
Real or simulated workplaces, expected production targets, safe working practices
Registration Data:
Subfield – Heavy Equipment Operations; Date first registered – not specified; Date this version registered – not specified; Anticipated review – not specified; Body responsible for review – Namibia Training Authority
Year:
2025
Region / City:
Chiloeches, Guadalajara (Spain)
Topic:
Demolition, Construction Equipment
Document Type:
Press Release
Organization:
Liebherr Ibérica, Hercal
Author:
María Villanueva
Target Audience:
Industry professionals, construction companies, demolition contractors
Period of validity:
2025 and onwards
Approval Date:
27th June 2025
Modification Date:
N/A
Document type:
Standard operating procedure
Equipment:
Hydraulic guillotine
Context:
School workshop environment
Review cycle:
Annual or when work processes change
Operational requirements:
Single operator with permission and training
Safety measures:
Guards, safety devices, emergency stop, infra-red safety beams
Personal protective equipment:
Gloves for material handling, respiratory protection as required
Identified hazards:
Pinch and crush points, striking and shearing, eye injury, entanglement, electrical and hydraulic components, manual handling, sharp edges
Approval details:
Signed and dated after review
Source type:
Institutional safety procedure
Year:
2020
Region / City:
IFAT 2020
Topic:
Waste water treatment, Pump technology
Document type:
Product announcement
Organization:
KSB SE & Co. KGaA
Author:
KSB Group
Target audience:
Industrial professionals, engineers
Period of validity:
2020
Approval date:
September 2020
Date of changes:
Not specified
Year:
2023
Region / City:
London, UK; Lausanne, CH
Topic:
Cavitation, Hydraulics, Fluid Dynamics
Document Type:
Research Paper
Institution:
CITY, University of London; EPFL
Author:
E. Stavropoulos Vasilakis, P. Koukouvinis, M. Farhat, M. Gavaises
Target Audience:
Researchers in Fluid Dynamics, Engineering, Hydraulics
Period of Application:
N/A
Approval Date:
N/A
Modification Date:
N/A
Note:
Year
Year:
2021
Region / City:
Cleveland, OH
Topic:
Hydraulic Cement Underlayment
Document Type:
Product MasterSpec Section
Organization / Institution:
The American Institute of Architects (AIA)
Author:
The Euclid Chemical Company
Target Audience:
Design professionals, contractors, and project managers
Validity Period:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Note:
Year
Topic:
Lifting Equipment Setup and Safety Procedures
Document Type:
Safety and Operational Plan
Product Title:
KuDoS – Bus Bar Cutter & Benders
Product Tagline:
Professional Electric & Electronic Tool Hand Tools
Brand:
KuDoS
Document Type:
Product Catalogue
Product Category:
Hydraulic Bus Bar Cutter and Benders
Models:
HYBC-120; ASC-7510; HYBN-120; HYBN-160
Suitable Materials:
Aluminum; Copper; Iron; Stainless Steel
Maximum Pressure:
700 bar (10,000 psi)
Maximum Output:
Up to 43.93 tons / 390.8 kN
Cutting Capacity:
Up to 120 mm width; up to 12 mm thickness
Bending Capacity:
Up to 160 mm width; up to 90 degree angle; up to 12 mm thickness
Power Source:
Hydraulic pump with rated oil pressure of 700 bar
Brochure PDF:
https://www.dropbox.com/s/26q66z5g6fshcmu/KuDos_Catalogue.pdf?dl=0
Product Gallery:
Attached
Year:
2026
Type of document:
Educational WebQuest
Subject:
Fluid power systems, hydraulics, pneumatics
Intended audience:
Students or learners exploring engineering concepts
Source:
HowStuffWorks, Wessels Living History Farm, eLCOSH, About.com
Skills developed:
Research, critical thinking, technical understanding
Year:
2023
Region / City:
Kentucky
Topic:
Hydrology, Hydraulic Engineering
Document Type:
Software Recommendations
Organization:
Kentucky Transportation Cabinet (KYTC)
Author:
KYTC
Target Audience:
Drainage Designers, Civil Engineers
Effective Period:
2023
Approval Date:
April 24, 2023
Modification Date:
None
Contextual Description:
A list of hydrologic and hydraulic software tools recommended by KYTC for drainage design, including methods and calculations for hydrology and hydraulics.
Year:
2026
Region / City:
Unknown
Subject:
Well pumping and hydraulic properties
Document Type:
Technical report
Institution:
Not specified
Author:
Not specified
Target Audience:
Not specified
Period of validity:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Year:
2026
Region / City:
United States
Subject:
Erosion control, hydraulic application, soil stabilization
Document Type:
Technical specification
Organization / Agency:
U.S. Department of Transportation or associated civil engineering authority
Target Audience:
Contractors, applicators, engineers
Material Coverage:
Hydraulic Tackifiers, Organic Fiber Matrix, Bonded Fiber Matrix, Reinforced Fiber Matrix
Performance Duration:
3–12 months depending on product type
Application Requirements:
Mechanical agitation and slurry bypass equipment
Safety and Environmental Compliance:
EPA and OSHA standards, non-toxic, biodegradable, non-corrosive
Testing Standards:
ASTM D7367, ASTM D422, ASTM D4444
Certification Required:
Applicator’s Certification from manufacturer for specific tackifiers
Moisture Content Limits:
Maximum 15% at delivery
Particle Size Standards:
Specific sieve retention percentages per product type
Curing Time:
2–48 hours depending on product
Year:
2026
Region / City:
Montpellier, France
Subject:
River Discharge Estimation
Document Type:
Scientific Research Paper
Organization / Institution:
INRAE
Author:
Hind Oubanas, Pierre-Olivier Malaterre, Igor Gejadze
Target Audience:
Researchers, Scientists, Engineers
Date Approved:
2026-02-26
Date Modified:
Not specified
Period of Validity:
Ongoing research, subject to updates post-SWOT mission launch
Keywords:
Hydraulic Modeling, Data Assimilation, River Discharge, Satellite Observations, SWOT Mission
Note:
Context
Year:
2014
Region / city:
USA
Topic:
Environmental impact of hydraulic fracturing operations
Document type:
Press release
Organization / institution:
Green Century Capital Management, As You Sow, Investor Environmental Health Network
Author:
Lucia von Reusner, Danielle Fugere, Richard Liroff, others
Target audience:
Investors, environmental advocates, oil and gas industry stakeholders
Effective period:
June 2014
Approval date:
June 10, 2014
Changes date:
Not specified
Year:
2023
Region / city:
Wisconsin
Subject:
Utility facility construction and maintenance permits
Document type:
Application/Permit
Authority:
Wisconsin Department of Transportation
Author:
Wisconsin Department of Transportation
Target audience:
Utility facility owners
Period of validity:
Not specified
Approval date:
Not specified
Date of amendments:
Not specified