№ files_lp_4_process_2_82584
File format: docx
Character count: 8226
File size: 21 KB
Technical specification for construction materials detailing the selection, installation, and performance requirements of weatherstrips, door thresholds, and door bottoms, including manufacturer information, standards compliance, and installation procedures.
Year:
2026
Region / City:
Rosemount, MN, USA
Subject:
Building Construction Materials
Document Type:
Technical Specification
Organization:
Reese Enterprises, Inc.
Manufacturer:
Reese Enterprises, Inc.
Product Types:
Weatherstrips, Door Thresholds, Door Bottoms, Auxiliary Products
Standards Referenced:
ANSI 117.1, ASTM E152, NFPA 252, UL 10B
Accessibility Compliance:
ADAAG, ANSI A117.1
Installer Qualifications:
Minimum 2 years of experience
Warranty:
5 years against defects in material or workmanship
Delivery and Storage Conditions:
Comply with manufacturer recommendations
Installation Requirements:
Field measurements verification, proper alignment, substrate preparation
Environmental Conditions:
Spaces must be enclosed, weather tight, and dry; HVAC operational
Submittals Required:
Manufacturer data sheets, preparation and maintenance instructions
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Building construction materials, door sealing products
Document Type:
Technical specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Reese Enterprises, Inc.
Target Audience:
Architects, contractors, construction professionals
Reference Standards:
ASTM E152, NFPA 252, UL 10B, UL 10C, UL 1784
Product Models:
Reese Model 701, Reese No. 571 Automatic Door Bottom, Reese No. 599 Series Head and Jamb Seal, Reese No. 371 Series door bottom
Warranty:
5-year limited manufacturer warranty
Installation Requirements:
Compliance with manufacturer instructions, field measurements verification, proper substrate preparation
Materials:
Aluminum alloy 6063-T5, Architectural brass alloy 385, polyurethanic and elastomeric thermoplastic edge seals
Delivery & Storage:
Follow manufacturer instructions for temperature, humidity, and protection from damage
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Weatherstrips, door thresholds, door bottoms, and auxiliary door products
Document Type:
Construction specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Not specified
Intended Audience:
Architects, contractors, and construction professionals
Period of Validity:
Project-specific, dependent on installation
Approval Date:
Not specified
Revision Date:
Not specified
Manufacturer Qualifications:
Minimum 5 years of experience in fabrication and installation of similar products
Installer Qualifications:
Minimum 2 years of experience in installation of similar products
Warranty:
5-year limited manufacturer warranty
Materials:
Aluminum alloy 6063-T5, various finishes including mill, black anodized, clear anodized, gold anodized, dark bronze anodized
Accessories:
Edge seals, rain drips, automatic door bottoms
STC Rating:
Up to 50 depending on door system
Year:
2016-2020
Region / City:
Rosemount, MN
Subject:
Weatherstrips, Thresholds, and Door Bottoms
Document Type:
Specification Section
Organization:
Reese Enterprises, Inc.
Author:
Not specified
Target Audience:
Specifiers, Architects, Engineers
Period of Validity:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Note:
Year
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Building construction materials, door sealing products
Document Type:
Technical specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Reese Enterprises, Inc.
Target Audience:
Architects, contractors, construction professionals
Reference Standards:
ASTM E152, NFPA 252, UL 10B, UL 10C, UL 1784
Product Models:
Reese Model 701, Reese No. 571 Automatic Door Bottom, Reese No. 599 Series Head and Jamb Seal, Reese No. 371 Series door bottom
Warranty:
5-year limited manufacturer warranty
Installation Requirements:
Compliance with manufacturer instructions, field measurements verification, proper substrate preparation
Materials:
Aluminum alloy 6063-T5, Architectural brass alloy 385, polyurethanic and elastomeric thermoplastic edge seals
Delivery & Storage:
Follow manufacturer instructions for temperature, humidity, and protection from damage
Year:
2026
Region / City:
Rosemount, MN
Theme:
Weatherstrips, thresholds, door bottoms
Document Type:
Product Specification
Organization:
Reese Enterprises, Inc.
Author:
Reese Enterprises, Inc.
Target Audience:
Specifiers, contractors, architects
Period of Effect:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Weatherstrips, door thresholds, door bottoms, and auxiliary door products
Document Type:
Construction specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Not specified
Intended Audience:
Architects, contractors, and construction professionals
Period of Validity:
Project-specific, dependent on installation
Approval Date:
Not specified
Revision Date:
Not specified
Manufacturer Qualifications:
Minimum 5 years of experience in fabrication and installation of similar products
Installer Qualifications:
Minimum 2 years of experience in installation of similar products
Warranty:
5-year limited manufacturer warranty
Materials:
Aluminum alloy 6063-T5, various finishes including mill, black anodized, clear anodized, gold anodized, dark bronze anodized
Accessories:
Edge seals, rain drips, automatic door bottoms
STC Rating:
Up to 50 depending on door system
Year:
2016-2020
Region / City:
Rosemount, MN
Subject:
Weatherstrips, Thresholds, and Door Bottoms
Document Type:
Specification Section
Organization:
Reese Enterprises, Inc.
Author:
Not specified
Target Audience:
Specifiers, Architects, Engineers
Period of Validity:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Note:
Year
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Building construction materials, door sealing products
Document Type:
Technical specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Reese Enterprises, Inc.
Target Audience:
Architects, contractors, construction professionals
Reference Standards:
ASTM E152, NFPA 252, UL 10B, UL 10C, UL 1784
Product Models:
Reese Model 701, Reese No. 571 Automatic Door Bottom, Reese No. 599 Series Head and Jamb Seal, Reese No. 371 Series door bottom
Warranty:
5-year limited manufacturer warranty
Installation Requirements:
Compliance with manufacturer instructions, field measurements verification, proper substrate preparation
Materials:
Aluminum alloy 6063-T5, Architectural brass alloy 385, polyurethanic and elastomeric thermoplastic edge seals
Delivery & Storage:
Follow manufacturer instructions for temperature, humidity, and protection from damage
Year:
2026
Region / City:
Rosemount, MN
Theme:
Weatherstrips, thresholds, door bottoms
Document Type:
Product Specification
Organization:
Reese Enterprises, Inc.
Author:
Reese Enterprises, Inc.
Target Audience:
Specifiers, contractors, architects
Period of Effect:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Year:
Not specified
Region / City:
Rosemount, MN, USA
Subject:
Weatherstrips, door thresholds, door bottoms, and auxiliary door products
Document Type:
Construction specification
Organization / Institution:
Reese Enterprises, Inc.
Author:
Not specified
Intended Audience:
Architects, contractors, and construction professionals
Period of Validity:
Project-specific, dependent on installation
Approval Date:
Not specified
Revision Date:
Not specified
Manufacturer Qualifications:
Minimum 5 years of experience in fabrication and installation of similar products
Installer Qualifications:
Minimum 2 years of experience in installation of similar products
Warranty:
5-year limited manufacturer warranty
Materials:
Aluminum alloy 6063-T5, various finishes including mill, black anodized, clear anodized, gold anodized, dark bronze anodized
Accessories:
Edge seals, rain drips, automatic door bottoms
STC Rating:
Up to 50 depending on door system