№ files_lp_4_process_2_52933
File format: docx Character count: 23861 File size: 510 KB
Technical guidance describing preparation of RC tow planes and sailplanes, tow line construction, communication procedures between pilots, and operational considerations during aerotowing flights.
Year: Not specified
Topic: RC aerotowing operations
Document type: Technical guidelines
Author: IFlyTailies (Alex, “Schleppmeister”)
Organization / Website: IFlyTailies
Aircraft models mentioned: Sr. Telemaster; Pilatus Porter 3.2m
Glider size reference: Up to 10.6 m / 34 ft wingspan
Power recommendation: Minimum 100 W per pound combined tow plane and glider weight
Tow line materials: Braided Nylon Seine Twine
Tow line configuration: Center line with optional breaking lines at each end
Recommended tow line length: 20–40 m depending on pilot experience
Primary subjects: Tow plane preparation; glider preparation; tow line setup; towing procedures; communication and safety considerations
Intended audience: RC tow plane and sailplane pilots
Safety notice: Recommendations based on personal experience and used at user’s own risk
Liability statement: Author does not assume responsibility for incidents resulting from application of the guidelines
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
BGA SDMP 267 Aircraft Maintenance Programme for Schleicher ASW 27A & B Sailplanes
Document title: BGA SDMP 267 template (only for use in BGA airworthiness system)
Programme name: BGA Self-Declared Minimum Inspection Program (SDMP) 267
Aircraft type: Schleicher ASW 27A & B sailplanes
Aircraft category: ELA1 Sailplanes, Self-Launching/Sustaining Sailplanes, TMG (non-commercial operations)
Regulatory basis: M.A.302(i), M.A.302(g), M.A.302(h)5, ML.A.201, AMC M.A.302(e)
Compliance reference: EASA Minimum Inspection Programme, Appendix A
Design Approval Holder: Alexander Schleicher GmbH & Co Segelflugzeugbau
Applicable maintenance data: ASW27 Maintenance and Flight Manual including TN 20 (07 Nov 2019)
Issuing organisation: British Gliding Association (BGA)
Form number: 267
Scope of tasks: Tasks 1–62 (all aircraft), Tasks 63–89 (powered sailplanes)
Content elements: Aircraft identification, maintenance requirements, pilot-owner maintenance declaration, owner approval, certification statement, appendices, record of revisions
Intended signatory: Owner or lessee responsible for continuing airworthiness
Call Details for Roadside Assistance or Tow Request
Note: Year
Topic: Roadside Assistance / Tow Service
Document Type: Call Log
Installation Instructions for REDARC Tow Pro Elite on 2024 Toyota Tacoma
Product: REDARC Tow Pro Elite (EBRH-ACCV3-NA)
Vehicle: 2024 Toyota Tacoma
Components: REDARC 13ft Remote Head Wiring Kit (RHWK-004); REDARC Square Switch Blank (TPSI-011); REDARC Encapsulated Protection Device (EPDK-001); 7-Pin Gooseneck Trailer Harness
Required Materials: 12ga blue, black, and white wires (12’ each); fuse holder with 25 amp fuse; wire connectors; wire loom; zip ties; screws
Tools: Philips screwdriver; wire strippers; wire crimpers; wire cutters; panel removal tools; power drill; razor blade or utility knife; fiberglass rods; circuit test device
Electrical Connection: Direct battery connection with inline fuse or connection to internal fuse block
Installation Areas: Engine bay; passenger footwell; driver and rear door trim panels; A-pillar; rear storage compartment; frame rail
Procedure Sections: Power wiring; Remote head installation; Trailer brake wire integration; Brake light signal connection; Controller mounting
Wiring Modifications: Integration with factory harness; insertion of blue trailer brake wire; connection through rubber grommets; splice into light green gR3 brake signal wire
Mounting Location: Driver side rear storage frame
2025 Tow Convention Schedule of Events
Year: 2025
Region / City: Not specified
Topic: Tow Truck and Car Shows, Vendor Events
Document Type: Event Schedule
Organization: Not specified
Author: Not specified
Target Audience: Industry professionals, Tow Truck and Car enthusiasts
Period of Action: September 19-21, 2025
Approval Date: Not specified
Change Date: Subject to change
Topics: Aerotowing Sailplanes Tow