№ files_lp_4_process_3_061593
File format: docx
Character count: 10157
File size: 18 KB
Year:
2025
Region / City:
Deerfield, IL
Topic:
Composite Decking
Document Type:
Technical Specification
Organization / Institution:
Fiberon, LLC
Author:
Fiberon, LLC
Target Audience:
Architects, Contractors
Period of Validity:
50 years
Approval Date:
2025
Revision Date:
N/A
Note:
Related Sections
EN 438-2 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins - Part 2:
Determination of properties; 2016
Pre-Installation Conference:
Required
Warranty:
10-year and 50-year limited warranty available
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Year:
2026
Region / Location:
Not specified
Subject:
Polyethylene pipe installation and handling
Document Type:
Technical guidance
Organization / Institution:
Plastic Pipes Institute
Material Standard:
BS EN12201-2
Temperature Reference:
20°C
Pipe Sizes:
20mm–1200mm
SDR Range:
11, 17, 21, 26
Section:
J40 Flexible Sheet Tanking / Damp Proofing
Document reference:
J40/2862; J40/310; J40/320; J40/380
Product type:
Loose laid polyethylene gas retardant damp proofing / tanking
Manufacturer:
RIW Ltd
Manufacturer address:
487/488 Ipswich Road, Slough, Berkshire SL1 4EQ
Contact telephone:
+44 1753 944200
Email:
[email protected]
Website:
www.riw.co.uk
Product reference:
RIW Structureseal GPT
Membrane thickness:
1.5mm
Membrane colour:
Grey
Joint specification:
100mm minimum selvedge laps with RIW Gas Seal Tape HC or RIW Sheetseal GR
Protection board options:
RIW Double Drain (8mm); RIW Protection Board (3mm)
Bonding method:
RIW Adhesive Tape
Inspection requirement:
Notice to be given before covering membrane
Workmanship requirements:
Clean, dry substrate; gas tight joints; fully supported and continuous membrane
Title:
Recycled Polyethylene Terephthalate (rPET) Bottles for Food Contact — Specification
Year:
2024
Organization:
African Organization for Standardization (ARSO)
Technical Committee:
ARSO/TC 14, Food packaging and labelling
Document Type:
African Standard
Scope:
Requirements, sampling and test methods for recycled PET bottles and recyclates (flakes and pellets) for food contact applications
Normative References:
ISO 472:2013; ISO 12418-2; ISO 13106:2014; ISO 1158; ISO 1628-5:1998; ASTM F1877-16; ASTM D4532-15; ASTM D6290-19; ASTM D7486-14; ASTM F2013-10; ASTM E1347-06(2020); ASTM D4602-93(2020)
Approval Requirement:
Publication requires approval by at least 75% of member bodies casting a vote
Copyright Holder:
African Organisation for Standardisation
Publisher Address:
ARSO Central Secretariat, International House 3rd Floor, P.O. Box 57363 — 00200 City Square, Nairobi, Kenya
Subject:
Quality and safety specifications for rPET bottles and flakes intended for food contact
Year:
2003
Region / City:
United Kingdom
Topic:
Plastics piping systems, Polyethylene fittings
Document Type:
Standard
Organization / Institution:
British Standards Institution (BSI)
Author:
Not specified
Target Audience:
Professionals in the UK water industry
Effective Period:
Until March 2005
Approval Date:
5 December 2003
Amendment Date:
No amendments listed
Additional Information:
Reference to UK regulations on water quality
Cross-References:
British Standards implementing international standards
Note:
Context Description
Section Number:
33 47 16
Title:
Temporary Exposed Geomembrane Cover Using Woven Coated Polyethylene
Product Name:
RhinoSkin™ Woven Coated Polyethylene Geomembrane
Material Type:
Woven Coated Polyethylene (WCPE)
Available Thicknesses:
12 mil, 16 mil, 20 mil, 24 mil
Standards Referenced:
ASTM D751; ASTM D4218; ASTM D4355; ASTM D4833; ASTM D5261; ASTM E96; ASTM G154
Manufacturer:
Owens Corning
Manufacturer Address:
One Owens Corning Parkway, Toledo, OH 43659
Application:
Temporary Exposed Geomembrane Cover (TEGC)
Warranty Period:
1.5, 2, 2.5, or 10 years (exposed applications)
Quality Requirements:
Manufacturer Quality Control Program and Certificate of Compliance required
Minimum Manufacturer Experience:
5 years continuous production; 5,000,000 square feet produced in last 5 years
Minimum Fabricator Experience:
5 years continuous fabrication; 5,000,000 square feet fabricated in last 5 years
Minimum Installer Experience:
5 years continuous installation; 5,000,000 square feet installed in last 5 years
Labeling Requirements:
Manufacturer name, fabricator name (if applicable), product identification, production date, thickness, roll dimensions, roll or panel number, deployment instructions
Storage Requirements:
Protected from damage; sacrificial cover required if stored on site more than six months; maximum stacking three rolls high
Testing Requirements:
Physical and mechanical properties verified by ASTM test methods
Intended Use:
Exposed geomembrane liner applications
Year:
2021
Region / City:
International
Theme:
Sustainable waste management, solar energy, plastic recycling
Document Type:
Book Chapter
Organization / Institution:
St. Francis de Sales College (Autonomous)
Author:
Gisa Grace Ninan
Target Audience:
Scientific community
Period of Validity:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Contextual Description:
A research chapter detailing an experimental study on using Scheffler solar concentrators for recycling plastic waste into composite materials.
Year:
2025
Region / City:
New London, North Carolina
Theme:
Composite Decking, Building Materials
Document Type:
Specification Section
Organization:
Fiberon, LLC
Author:
Fiberon, LLC
Target Audience:
Architects, Contractors
Period of Validity:
Not specified
Approval Date:
Not specified
Modification Date:
Not specified
Warranty:
10-year Stain, Fade, and Performance Limited Commercial Warranty; 50-year Stain, Fade, and Performance Residential Warranty
Standards:
ASTM D1037, ASTM D1413, ASTM D3345, ASTM D6109, ASTM D6341, ASTM D7032, ASTM E84, ASTM E330/E330M, ASTM F1679, EN 438-2, EN 13329, ICC-ES AC174
Related Sections:
Section 03 30 00, Section 04 20 00, Section 05 40 00, Section 06 10 00, Section 06 20 13, Section 07 62 00, Section 09 96 00
Manufacturer:
Fiberon, LLC
Product Information:
Polyethylene (PE) Composite Decking, Deck Fastening System, Accessories
Installation Method:
Detailed in the document
Environmental Conditions:
To be maintained within recommended limits
Pre-Installation Conference:
Required two weeks before work commencement
Mock-up Requirements:
To demonstrate quality and visual appearance
Product Data:
Manufacturer’s data sheets on each product
Designer Qualifications:
Licensed Structural Engineer
Installer Qualifications:
Minimum two years of experience with similar projects
Quality Assurance:
Detailed requirements for product uniformity, performance, and design
Test Reports:
To comply with ICC-ES AC174
Shipping and Handling:
Strict compliance with manufacturer’s instructions
Year:
N/A
Region / City:
N/A
Topic:
Composite wood decking
Document Type:
Specification
Organization / Institution:
N/A
Author:
N/A
Target Audience:
Engineers, architects, landscape architects, and installers
Effective Period:
N/A
Approval Date:
N/A
Amendment Date:
N/A
Year:
2021
Region / City:
Houston, TX
Topic:
Steel Decking
Document Type:
Technical Specification
Organization:
CSM Metal Deck
Author:
CSM Products & Solutions
Target Audience:
Architects, Designers, Contractors
Period of Validity:
N/A
Approval Date:
N/A
Date of Changes:
N/A
Note:
Year
Year:
2026
Region / City:
Not specified
Subject:
Structural Steel, Metal Decking, Roofing
Document Type:
Technical Specification
Organization / Institution:
Construction Contracting and Design Teams
Referenced Standards:
AISI S100, ASTM A36/A36M, ASTM A653/A653M, ASTM A1008/A1008M, ASTM C423, ASTM E119, AWS D1.1/D1.3, FM Global, UL Listings, SDI Publications
Target Audience:
Contractors, Engineers, Subcontractors, Inspectors
Submittal Requirements:
Shop drawings, product data, samples, manufacturer literature, certificates, fire resistance and acoustic testing
Performance Criteria:
Wind uplift resistance, fire resistance, acoustic performance, cantilever closure deflection
Material Requirements:
Galvanized steel sheets, painted steel sheets, structural steel shapes, acoustic insulation
Warranty:
FAR Construction Warranty clause 52.24621
Manufacturer:
DuraLife Decking (Barrette Outdoor Living)
Location:
Biddeford, ME
Contact:
(800) 8668101; www.duralifedecking.com
Section Number:
067300
Title:
Composite Decking, Porch and Deck
Product Name:
MVP Decking Profile
Material:
Wood and polypropylene composite
Standards Referenced:
ASTM D7032; ASTM E84; AWPA E1; AWPA E10; ASTM D1413; ICC-ES AC174; ANSI/NFSI B101.1
Structural Performance:
125 lbf/sq. ft. uniform live load (deck); 100 lbf/sq. ft. uniform load and 300 lbf concentrated load (stairs)
Slip Resistance:
Static coefficient of friction not less than 0.59
Warranty:
25-year limited warranty with 5-year labor replacement
Flame Spread Classification:
Class C
Termite Resistance:
AWPA E1 rating of 10
Fungal Resistance:
AWPA E10 not less than 105 percent of ACQ treated SYP; ASTM D1413 no decay
Application:
Decks and porches
Substitutions:
Not permitted
Source Limitations:
Single approved manufacturer
Related Sections:
061000 Rough Carpentry; 068100 Composite Railings
Year:
2023
Region / City:
West Sacramento, CA
Topic:
Steel Decking
Document Type:
Product Specification
Organization:
ASC Steel Deck
Author:
ASC Steel Deck
Target Audience:
Contractors, Engineers, Architects
Period of Validity:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Year:
2025
Region / City:
New London, North Carolina
Theme:
Composite Decking, Building Materials
Document Type:
Specification Section
Organization:
Fiberon, LLC
Author:
Fiberon, LLC
Target Audience:
Architects, Contractors
Period of Validity:
Not specified
Approval Date:
Not specified
Modification Date:
Not specified
Warranty:
10-year Stain, Fade, and Performance Limited Commercial Warranty; 50-year Stain, Fade, and Performance Residential Warranty
Standards:
ASTM D1037, ASTM D1413, ASTM D3345, ASTM D6109, ASTM D6341, ASTM D7032, ASTM E84, ASTM E330/E330M, ASTM F1679, EN 438-2, EN 13329, ICC-ES AC174
Related Sections:
Section 03 30 00, Section 04 20 00, Section 05 40 00, Section 06 10 00, Section 06 20 13, Section 07 62 00, Section 09 96 00
Manufacturer:
Fiberon, LLC
Product Information:
Polyethylene (PE) Composite Decking, Deck Fastening System, Accessories
Installation Method:
Detailed in the document
Environmental Conditions:
To be maintained within recommended limits
Pre-Installation Conference:
Required two weeks before work commencement
Mock-up Requirements:
To demonstrate quality and visual appearance
Product Data:
Manufacturer’s data sheets on each product
Designer Qualifications:
Licensed Structural Engineer
Installer Qualifications:
Minimum two years of experience with similar projects
Quality Assurance:
Detailed requirements for product uniformity, performance, and design
Test Reports:
To comply with ICC-ES AC174
Shipping and Handling:
Strict compliance with manufacturer’s instructions
Year:
2018 - 2019
Region / City:
St. Joe, IN
Topic:
Steel roof and floor decking
Document Type:
Specification
Organization / Institution:
Vulcraft/Verco Group
Author:
Vulcraft/Verco Group
Target Audience:
Specifiers, contractors
Effective Period:
Not specified
Approval Date:
Not specified
Revision Date:
Not specified
Standards:
ANSI, AWS, ASTM, FM Global, IBC, UL
Product Data Required:
Yes
Shop Drawings:
Yes
Welding Certifications:
Optional
Testing Reports:
Yes
Field Quality-Control Reports:
Optional
LEED Requirements:
Yes
Manufacturer Qualifications:
10 years minimum experience
Installer Qualifications:
2 years minimum experience
FM Global Listing:
Required for Class 1 fire rating and windstorm ratings
Year:
2018-2019
Region / City:
St. Joe, IN, USA
Subject:
Construction materials, steel decking
Document Type:
Technical specification
Organization:
Vulcraft/Verco Group
Author:
ARCAT, Inc.
Target Audience:
Architects, engineers, contractors
Standards Referenced:
ANSI, AWS, ASTM, FM Global, IBC, UL
Products Covered:
Fluted steel roof and floor decks, accessories
Manufacturer Qualifications:
Minimum ten years of experience, member of Steel Deck Institute
Installer Qualifications:
Minimum two years experience installing similar products
Testing Agency Requirements:
ASTM E 329 compliance
Fire-Resistance Rating:
ASTM E 119 or UL 263
Delivery and Handling:
Manufacturer’s unopened packaging, protection from weather
Substitutions:
Not permitted
Year:
2026
Region / City:
Halle, Germany; Bayreuth, Germany; Rudolstadt, Germany; Karlsruhe, Germany; Eggenstein-Leopoldshafen, Germany
Topic:
X-ray microscopy, fluid flow simulations, block copolymer synthesis, filtration materials
Document type:
Research study
Institution / Organization:
Martin Luther University of Halle-Wittenberg, University of Bayreuth, Karlsruhe Institute of Technology, Fraunhofer Institute for Microstructure of Materials and Systems IMWS
Author:
Murilo I. Santos, Juliana Martins de S. e Silva, Daina Damberga, Markus Langner, Rafaela Debastiani, Ulrike Hirsch, Andreas Greiner, Ralf B. Wehrspohn
Target audience:
Researchers, scientists in the fields of material science, polymer chemistry, and filtration technology
Date of approval:
2026
Date of changes:
Not specified
Context:
Research study focused on the synthesis and characterization of block copolymers and the visualization of filtration materials using X-ray microscopy and fluid flow simulations.
Year:
2022
Region / City:
England
Topic:
LIDAR Data, Elevation Models
Document Type:
Technical Guide
Organization:
Environment Agency
Author:
Environment Agency
Target Audience:
Professionals in geospatial data and environmental sciences
Period of Validity:
2022
Approval Date:
April 2022
Amendment Date:
Not specified
Year:
N/A
Region / City:
N/A
Topic:
Composite wood decking
Document Type:
Specification
Organization / Institution:
N/A
Author:
N/A
Target Audience:
Engineers, architects, landscape architects, and installers
Effective Period:
N/A
Approval Date:
N/A
Amendment Date:
N/A