№ files_lp_4_process_3_140043
File format: docx Character count: 2744 File size: 83 KB
Technical welding procedure specification defining parameters, materials, joint geometry, and operational limits for semi-automatic GMAW flare bevel groove welds in ASTM A500 Grade C matched square tubing under AWS D1.1 provisions.
Company: Not specified
WPS Number: WPS-D1.1-001
Revision: 0
Date: 11/16/2017
Authorized Date: 11/13/2017
Supporting PQR: Prequalified BTC-P10-GF
Standard: AWS D1.1
Document Type: Welding Procedure Specification (WPS)
Welding Process: GMAW (Gas Metal Arc Welding)
Process Type: Semi-Automatic
Welding Position: Flat
Base Material Specification: ASTM A500
Base Material Grade: C
AWS Base Metal Group: I
Joint Type: Flare Bevel Groove in Butt Joints for Matched Square Tubing
Backing Material: None
Base Metal Thickness Range: 3/16 in – 3/4 in (PJP Groove Welds)
Filler Metal Specification: AWS A5.18
Filler Metal Classification: ER70S-6
Filler Metal Diameter: 0.035 in
Shielding Gas: 90/10 mixture (to be advised)
Minimum Preheat Temperature: 32°F
Minimum Interpass Temperature: 32°F
Current Type and Polarity: DCEP
Transfer Mode: Spray
Power Source Type: CV
Amperage Range: 190–280 A
Voltage Range: 22–30 V
Wire Feed Speed: 350–600
Postweld Heat Treatment: None
Root Opening: 0–1/8 in
Root Face: Minimum 3/16 in
Maximum Weld Reinforcement: 1/8 in
Effective Weld Size: 5/8 Radius
Reference Figures: Figure 3.2 (p.72), Table 2.1, Table 5.9
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.