№ lp_2_1_30725
File format: docx Character count: 17719 File size: 56 KB
Note: Year
Performance requirements: Cold fluid applied polyurea roofing/waterproofing system is intended to perform as a continuous barrier against liquid water and to flash or discharge to the exterior incidental water.
Related documents: Section 03 30 00 – CAST-IN-PLACE CONCRETE, Section 06 16 00 – SHEATHING, Section 07 60 00 – FLASHING AND SHEET METAL, Section 07 92 13 – ELASTOMERIC JOINT SEALANTS
Quality assurance: Manufacturer qualifications: ISO 9001:2008 & ISO 14001 certified.
Test methods: Adhesion to substrate according to EN 13596 or ASTM D 7234.
Environmental conditions: Do not apply material if it is raining or if such conditions appear to be imminent.
Warranty: Project specific warranty for performance of specified product.
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
EUCO QWIKJOINT UVR Semi-Rigid, UV-Resistant, Polyurea Floor Joint Filler Guide Specification
Year: 2026
Manufacturer: Euclid Chemical Co.
Product: EUCO QWIKJOINT UVR Semi-Rigid Polyurea Joint Filler
Type: Construction specification
Standards: ASTM D412, ASTM D2240, ISO 9001
Application: Floor joint filling
Surface conditions: Concrete joints, clean and dry
Installation requirements: Temperature range 10–32 °C, follow manufacturer instructions
Reference: ACI 302
Sikalastic Polyurethane Vehicular Traffic Coating System Specification (Section 07 18 16)
Organization: Sika Corporation
Document Type: Construction Specification Section
Section Number: 07 18 16
Subject: Vehicular Traffic Coatings
Product System: Sikalastic 710/22 Lo-Mod Hybrid Traffic System
Industry Standard Format: CSI MasterFormat
Applicable Standards: ASTM C957; ASTM D1079; ASTM D2697; ASTM D2369; ASTM D412; ASTM D624; ASTM D2240; ASTM D638
Manufacturer: Sika Corporation
Manufacturer Address: 201 Polito Avenue, Lyndhurst NJ 07071, United States
Related Specification Sections: 03 30 00 Cast-in-Place Concrete; 06 16 00 Sheathing; 07 60 00 Flashing and Sheet Metal; 07 92 13 Elastomeric Joint Sealants; 22 14 26 Plaza Drains
Installation Requirements: Cold fluid-applied polyurethane traffic waterproofing membrane applied to concrete, plywood, and existing traffic coatings
System Components: Polyurethane base coat, epoxy binder wear coat, primers, optional accelerators and top coats, quartz aggregate, nylon reinforcement fabric
Performance Characteristics: Seamless elastomeric waterproofing membrane designed for vehicular traffic exposure
Application Thickness: 43 mils (standard traffic); 55 mils (heavy traffic); 87 mils (extra heavy traffic)
Quality Requirements: Installer with minimum three years experience and at least three similar completed projects
Testing Procedures: Field adhesion testing and manufacturer verification methods
Regulatory Compliance: Local building codes and state VOC regulations
Submittals: Product data, materials list, installation procedures, drawings, and mock-up demonstration
Warranty: Manufacturer’s standard product warranty
Sikalastic Polyurethane Traffic Coating Specification Guide
Note: Year
Subject: Construction, Waterproofing, Traffic Coatings
Document Type: Specification Guide
Organization / Institution: Sika Corporation
Target Audience: Architects, Design Professionals, Contractors
Topics: ROOFINGWATERPROOFING Polyurea SIKALASTIC