№ lp_1_2_01120
File format: docx
Character count: 2304
File size: 45 KB
Technical specification document describing the features, dimensions, materials, finishes, and optional accessories for unframed panel cubicles in washroom systems.
Note:
Year
Topic:
Washroom Systems
Document Type:
Technical Specification
Organization / Institution:
Venesta Washroom Systems
Target Audience:
Architects, Designers, Contractors
Product:
Infinite Full Height ColourCoat range
Maximum Ceiling Height:
2815mm
Maximum Depth:
Up to 2090mm
Floor Clearance:
20mm
Minimum Ceiling Clearance:
30mm
Edge Treatment:
1mm nominal matching ABS lipping
Finish Options:
Satin anodised aluminium, Black effect powder coated aluminium, Brass effect powder coated aluminium, Bronze effect powder coated aluminium
Optional Accessories:
Venesta toilet roll holder, Venesta coat hook, Document M compliant grab rails and door pulls
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Document reference:
120/01
Product category:
Washroom cubicles
Manufacturer:
Venesta Washroom Systems
Manufacturer address:
Unit 19–23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA, United Kingdom
Product range:
Infinite ColourCoat
Construction type:
Unframed panel cubicles
Material:
High performance Medium Density Fibreboard (MDF) 720 kg/m³
Finish:
Pigmented polyurethane lacquer, 20% gloss
Colour specification:
Classic RAL colours excluding metallic and fluorescent
Panel thickness:
Partitions 26 mm nominal; doors and pilasters 45 mm nominal
Maximum height:
Up to 2070 mm from finished floor level
Maximum depth:
Up to 2090 mm nominal
Floor clearance:
50 mm
Minimum ceiling clearance:
20 mm
Fixing system:
Headrail with three-part fixing system; steel Z-clips and H channel fixings
Hardware options:
Hinges, indicator bolts, pedestals, headrail end caps in aluminium or stainless steel finishes
Accessibility features:
Document M 2004 compliant grab rails and door pulls
Optional accessories:
Toilet roll holder, coat hook, grab rails, door pulls
Source type:
Technical product specification
Note:
Year
Description:
Product specification for unframed panel cubicles from Venesta Washroom Systems.
Reference number:
120/01
Document type:
Technical specification
Product category:
Washroom cubicles
Manufacturer:
Venesta Washroom Systems
Manufacturer address:
Unit 19–23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA
Product range:
Unity ColourCoat High Gloss
Height:
2070 mm from finished floor level to top of headrail
Maximum depth:
Up to 2084 mm nominal
Floor clearance:
50 mm
Minimum ceiling clearance:
20 mm
Material:
High performance moisture resistant medium density fibreboard (MDF), 720 kg/m³
Finish:
Primed and finished with 80% gloss pigmented polyurethane lacquer
Panel thickness:
Partitions 18 mm nominal; doors and pilasters 35 mm nominal
Colour options:
10 standard colours
Headrail system:
Slimline insert profile with three-part fixing system
Ironmongery:
Indicator bolt, mortice lock, hinges, pedestals and fixings with insert finish options
Fixing system:
Aluminium U-channel and E-channel fixings
Optional accessories:
Toilet roll holder, coat hook, Document M compliant grab rails and door pulls
Hardware finishes:
Satin anodised aluminium, black, brass effect, bronze effect powder coated aluminium
Standards referenced:
Document M 2004
Manufacturer and reference:
Venesta Washroom Systems, Unit 19-23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA.
Product:
‘Infinite HPL’ range.
Height:
Up to 2070mm from finished floor level to top of headrail.
Maximum depth:
Up to 2090mm nominal maximum recommended from face of back wall or rear ducting.
Floor clearance:
50mm.
Minimum ceiling clearance:
20mm.
Board/panel/door type:
High performance Medium Density 720kg/m³ grade Fibreboard (MDF) faced with High Pressure Laminate (HPL).
Edge treatment:
1mm nominal matching ABS lipping.
Thickness:
Partitions: 26mm nominal.
Doors and pilasters:
45mm nominal.
Colour finish:
34 colours from the standard range.
Headrail:
Slimline insert finish option here profile. 3 part fixing system which allows cubicles to finish 20mm below ceiling height.
Hinges:
Insert hinge finish option here effect rise and fall butt hinges. Outward opening hinge option available.
Indicator bolt and keep:
Insert indicator bolt finish option here modular lever operated slimline mortice lock and keep with circular faceplate and specialist tri-drive security emergency release key facility.
Pedestals:
Insert pedestal finish option here modular pedestals.
Pedestal adjustment:
± 10mm.
Fixings:
Partition to wall fixing: Insert finish option here H channel and steel Z-clips.
Pilaster to partition fixing:
Steel Z-clips.
Pilaster to wall fixing:
Insert finish option here H channel and steel Z-clips.
Optional accessories:
Venesta toilet roll holder (NBS Clause N13/462), Venesta coat hook (NBS Clause N13/429), Document M 2004 compliant grab rails and door pulls (NBS Clause N13/436).
Hardware finish options:
Satin anodised aluminium, Black effect powder coated aluminium, Brass effect powder coated aluminium, Bronze effect powder coated aluminium.
Hinges finish options:
Aluminium stainless steel effect, Black effect stainless steel with a durable PVD coating, Brass effect stainless steel with a durable PVD coating, Bronze effect stainless steel with a durable PVD coating.
Pedestal / Indicator Bolt / Headrail end cap finish options:
Stainless steel, Black effect stainless steel with a durable PVD coating, Brass effect stainless steel with a durable PVD coating, Bronze effect stainless steel with a durable PVD coating.
Please note:
Metal fittings have cost implications on some ranges. Black, brass and bronze effect satin anodised aluminium fittings could incur extended lead times.
Year:
2023
Region / City:
Gravesend, Kent
Subject:
Washroom systems
Document Type:
Product specification
Organization:
Venesta Washroom Systems
Author:
Venesta Washroom Systems
Target Audience:
Architects, designers, construction professionals
Period of Validity:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Note:
Year
Document Type:
Technical specification
Organization / Institution:
Venesta Washroom Systems
Description:
Technical specification for unframed panel cubicles for washrooms with various customization options.
Note:
Manufacturer and reference
Telephone:
01474 353333.
Product:
‘Unity Full Height HPL’ range.
Maximum height:
2835mm from FFL to top of headrail.
Maximum depth:
Up to 2084mm nominal maximum recommended from face of back wall or rear ducting.
Floor clearance:
50mm.
Minimum ceiling clearance:
20mm.
Board/panel/door type:
High performance Medium Density 720kg/m³ grade Fibreboard (MDF) faced with High Pressure Laminate (HPL).
Edge treatment:
1mm nominal matching ABS lipping.
Thickness:
Partitions: 18mm nominal MR chipboard.
Doors and pilasters:
35mm nominal MR MDF.
Colour finish:
34 colours from the standard range.
Headrail:
Slimline insert finish option here profile. 3 part fixing system which allows cubicles to finish 20mm below ceiling height.
Indicator bolt:
Insert finish option here flip style indicator bolt with circular face plate and emergency release facility.
Lock and keep:
Slimline lever operated mortice lock incorporating insert finish option here face plate. Insert finish option here wrap round keep.
Hinges:
Insert finish option here modular rise and fall flag hinge which can be set to fall open or closed.
Pedestals:
Insert finish option here
Pedestal adjustment:
± 5mm.
Fixings:
Partition to wall fixing: Insert finish option here U-channel.
Pilaster to partition fixing:
Insert finish option here U-channel. Pilaster to wall fixing: Insert finish option here E-channel.
Hardware material/colour finish:
Insert finish option here
Optional accessories:
Venesta toilet roll holder (NBS Clause N13/462), Venesta coat hook (NBS Clause N13/429), Document M 2004 compliant grab rails and door pulls (NBS Clause N13/436).
Please note:
Metal fittings have cost implications on some ranges. Black, brass and bronze effect satin anodised aluminium fittings could incur extended lead times. Please consult our sales team on 01474 353333 for further information.
Product reference:
function hpl pf toilet cubicles
Product type:
Unframed panel toilet cubicles
Classification code:
K32 Panel Cubicles 120
Manufacturer:
Formwise Washrooms Ltd
Manufacturer address:
Unit 3 Wendel Point, Park Farm, Wellingborough, Northamptonshire NN8 6BA
Contact telephone:
01933 405961
Contact fax:
01933 405971
Email:
[email protected]
Website:
www.formwise-washrooms.co.uk
Panels and doors material:
18mm moisture resistant chipboard faced both sides with high pressure laminate (HPL)
Core material:
Moisture resistant chipboard to V313
Surface finish:
Velour
Colour specification:
Colour to be confirmed from Formwise Washrooms HPL selection
Edge treatment (panels and doors):
Matching or contrasting durable 1mm PVC lipped edges
Pilasters material:
18mm moisture resistant chipboard faced both sides with high pressure laminate (HPL)
Pilasters edge treatment:
Vertical edges postformed to form continuous radius
Headrails:
Rigid polished aluminium section with bull-nosed leading edge
Legs:
Polished aluminium rectangular design, partition fixed, adjustable for floor levels
Ironmongery and accessories:
Aluminium pivot hinges, coat hook, DDA compliant slide operated indicator bolt with elliptical face plate, emergency release facility, channel bracket partition fixings
Hardware finish:
Polished aluminium
Overall height:
1980mm including 160mm floor clearance
Accessibility features:
DDA compliant indicator bolt and layout allowance for manoeuvring space
Door configuration:
Outward opening doors to ambulant and enlarged cubicles where required
Internal manoeuvring space:
450mm diameter within cubicle for inward opening door layouts
Manufacturer:
Formwise Washrooms Ltd
Product reference:
‘ethos sgl’ toilet cubicles
Pilasters:
Proprietary slimline pilaster profiles formed using optisheen stainless steel. Vertical edges are fully radiused for safety with complementary stainless steel headrail fixed above pilaster profiles.
Finish:
Satin Polished.
Colour:
Self coloured.
Doors:
12/13mm solid grade laminate (SGL) to provide maximum protection against water and vandalism.
Core material:
Not applicable.
Note:
Finish
Velour.
Edge treatment:
Edges are machined to a smooth profiled finish.
Panels:
12/13mm solid grade laminate (SGL) to provide maximum protection against water and vandalism.
Legs:
Cylindrical stainless steel pedestal leg located on the partition 200mm back from face of adjoining pilaster. Adjustable to accommodate varying floor levels.
Ironmongery/Accessories:
Sprung loaded pivot hinges & dampener / Buffered coat hook / DDA compliant lever operated indicator bolt with circular face plate and emergency release facility. / Channel bracket partition fixings.
Finish/Colour:
Stainless steel or stainless steel effect.
Dimensions:
Up to 2600mm overall height including 20mm floor clearance.
Other requirements:
Complete with outward opening doors to ambulant and enlarged cubicles where requested. Cubicles with inward opening doors can be set out to maintain 450mm diameter manoeuvring space within the cubicle.
Manufacturer:
Formwise Washrooms Ltd
Address:
Unit 3 Wendel Point, Ryle Drive, Park Farm, Wellingborough, Northamptonshire NN8 6BA
Phone:
01933 405961
Fax:
01933 405971
Email:
[email protected]
Website:
www.formwise-washrooms.co.uk
Product reference:
liquid toilet cubicles
Panels/Doors & Pilasters:
12/13mm solid grade laminate (SGL)
Core material:
Not applicable
Finish:
Velour
Colour:
To be confirmed from SGL selection
Headrail:
Rigid polished aluminium section with bull-nosed leading edge
Legs:
Tubular polished aluminium, adjustable for varying floor levels
Ironmongery/Accessories:
Polished aluminium adjustable pivot hinges, coat hook, DDA compliant slide operated indicator bolt with elliptical face plate, emergency release facility, channel bracket partition fixings
Dimensions:
1980mm overall height including 160mm floor clearance
Door options:
Outward opening for ambulant and enlarged cubicles, inward opening configurable for 450mm manoeuvring space
Type:
Product specification sheet
Intended use:
Commercial washroom installation
Material compliance:
Water and vandalism resistant
Document reference:
120/01
Product category:
Washroom cubicles
Manufacturer:
Venesta Washroom Systems
Manufacturer address:
Unit 19–23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA, United Kingdom
Product range:
Infinite ColourCoat
Construction type:
Unframed panel cubicles
Material:
High performance Medium Density Fibreboard (MDF) 720 kg/m³
Finish:
Pigmented polyurethane lacquer, 20% gloss
Colour specification:
Classic RAL colours excluding metallic and fluorescent
Panel thickness:
Partitions 26 mm nominal; doors and pilasters 45 mm nominal
Maximum height:
Up to 2070 mm from finished floor level
Maximum depth:
Up to 2090 mm nominal
Floor clearance:
50 mm
Minimum ceiling clearance:
20 mm
Fixing system:
Headrail with three-part fixing system; steel Z-clips and H channel fixings
Hardware options:
Hinges, indicator bolts, pedestals, headrail end caps in aluminium or stainless steel finishes
Accessibility features:
Document M 2004 compliant grab rails and door pulls
Optional accessories:
Toilet roll holder, coat hook, grab rails, door pulls
Source type:
Technical product specification
Note:
Year
Description:
Product specification for unframed panel cubicles from Venesta Washroom Systems.
Reference number:
120/01
Document type:
Technical specification
Product category:
Washroom cubicles
Manufacturer:
Venesta Washroom Systems
Manufacturer address:
Unit 19–23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA
Product range:
Unity ColourCoat High Gloss
Height:
2070 mm from finished floor level to top of headrail
Maximum depth:
Up to 2084 mm nominal
Floor clearance:
50 mm
Minimum ceiling clearance:
20 mm
Material:
High performance moisture resistant medium density fibreboard (MDF), 720 kg/m³
Finish:
Primed and finished with 80% gloss pigmented polyurethane lacquer
Panel thickness:
Partitions 18 mm nominal; doors and pilasters 35 mm nominal
Colour options:
10 standard colours
Headrail system:
Slimline insert profile with three-part fixing system
Ironmongery:
Indicator bolt, mortice lock, hinges, pedestals and fixings with insert finish options
Fixing system:
Aluminium U-channel and E-channel fixings
Optional accessories:
Toilet roll holder, coat hook, Document M compliant grab rails and door pulls
Hardware finishes:
Satin anodised aluminium, black, brass effect, bronze effect powder coated aluminium
Standards referenced:
Document M 2004
Manufacturer and reference:
Venesta Washroom Systems, Unit 19-23 St George’s Centre, St George’s Square, Gravesend, Kent, DA11 0TA.
Product:
‘Infinite HPL’ range.
Height:
Up to 2070mm from finished floor level to top of headrail.
Maximum depth:
Up to 2090mm nominal maximum recommended from face of back wall or rear ducting.
Floor clearance:
50mm.
Minimum ceiling clearance:
20mm.
Board/panel/door type:
High performance Medium Density 720kg/m³ grade Fibreboard (MDF) faced with High Pressure Laminate (HPL).
Edge treatment:
1mm nominal matching ABS lipping.
Thickness:
Partitions: 26mm nominal.
Doors and pilasters:
45mm nominal.
Colour finish:
34 colours from the standard range.
Headrail:
Slimline insert finish option here profile. 3 part fixing system which allows cubicles to finish 20mm below ceiling height.
Hinges:
Insert hinge finish option here effect rise and fall butt hinges. Outward opening hinge option available.
Indicator bolt and keep:
Insert indicator bolt finish option here modular lever operated slimline mortice lock and keep with circular faceplate and specialist tri-drive security emergency release key facility.
Pedestals:
Insert pedestal finish option here modular pedestals.
Pedestal adjustment:
± 10mm.
Fixings:
Partition to wall fixing: Insert finish option here H channel and steel Z-clips.
Pilaster to partition fixing:
Steel Z-clips.
Pilaster to wall fixing:
Insert finish option here H channel and steel Z-clips.
Optional accessories:
Venesta toilet roll holder (NBS Clause N13/462), Venesta coat hook (NBS Clause N13/429), Document M 2004 compliant grab rails and door pulls (NBS Clause N13/436).
Hardware finish options:
Satin anodised aluminium, Black effect powder coated aluminium, Brass effect powder coated aluminium, Bronze effect powder coated aluminium.
Hinges finish options:
Aluminium stainless steel effect, Black effect stainless steel with a durable PVD coating, Brass effect stainless steel with a durable PVD coating, Bronze effect stainless steel with a durable PVD coating.
Pedestal / Indicator Bolt / Headrail end cap finish options:
Stainless steel, Black effect stainless steel with a durable PVD coating, Brass effect stainless steel with a durable PVD coating, Bronze effect stainless steel with a durable PVD coating.
Please note:
Metal fittings have cost implications on some ranges. Black, brass and bronze effect satin anodised aluminium fittings could incur extended lead times.
Year:
2023
Region / City:
Gravesend, Kent
Subject:
Washroom systems
Document Type:
Product specification
Organization:
Venesta Washroom Systems
Author:
Venesta Washroom Systems
Target Audience:
Architects, designers, construction professionals
Period of Validity:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Note:
Year
Document Type:
Technical specification
Organization / Institution:
Venesta Washroom Systems
Description:
Technical specification for unframed panel cubicles for washrooms with various customization options.
Note:
Manufacturer and reference
Telephone:
01474 353333.
Product:
‘Unity Full Height HPL’ range.
Maximum height:
2835mm from FFL to top of headrail.
Maximum depth:
Up to 2084mm nominal maximum recommended from face of back wall or rear ducting.
Floor clearance:
50mm.
Minimum ceiling clearance:
20mm.
Board/panel/door type:
High performance Medium Density 720kg/m³ grade Fibreboard (MDF) faced with High Pressure Laminate (HPL).
Edge treatment:
1mm nominal matching ABS lipping.
Thickness:
Partitions: 18mm nominal MR chipboard.
Doors and pilasters:
35mm nominal MR MDF.
Colour finish:
34 colours from the standard range.
Headrail:
Slimline insert finish option here profile. 3 part fixing system which allows cubicles to finish 20mm below ceiling height.
Indicator bolt:
Insert finish option here flip style indicator bolt with circular face plate and emergency release facility.
Lock and keep:
Slimline lever operated mortice lock incorporating insert finish option here face plate. Insert finish option here wrap round keep.
Hinges:
Insert finish option here modular rise and fall flag hinge which can be set to fall open or closed.
Pedestals:
Insert finish option here
Pedestal adjustment:
± 5mm.
Fixings:
Partition to wall fixing: Insert finish option here U-channel.
Pilaster to partition fixing:
Insert finish option here U-channel. Pilaster to wall fixing: Insert finish option here E-channel.
Hardware material/colour finish:
Insert finish option here
Optional accessories:
Venesta toilet roll holder (NBS Clause N13/462), Venesta coat hook (NBS Clause N13/429), Document M 2004 compliant grab rails and door pulls (NBS Clause N13/436).
Please note:
Metal fittings have cost implications on some ranges. Black, brass and bronze effect satin anodised aluminium fittings could incur extended lead times. Please consult our sales team on 01474 353333 for further information.
Product name:
Caterpillar SGL children’s toilet cubicles
Manufacturer:
Formwise Washrooms Ltd
Manufacturer address:
Unit 3 Wendel Point, Park Farm, Wellingborough, Northamptonshire NN8 6BAT, United Kingdom
Contact telephone:
01933 405961
Fax:
01933 405971
Email:
[email protected]
Website:
www.formwise-washrooms.co.uk
Product category:
Panel cubicles – unframed
Reference code:
K32 Panel Cubicles 120
Material:
12/13 mm solid grade laminate (SGL)
Core material:
Not applicable
Finish:
Velour
Colour:
Colour from Formwise Washrooms SGL selection (to be confirmed)
Edge treatment:
Machined smooth profiled edges
Ironmongery:
Aluminium pivot hinges with increased finger protection
Accessories:
Powder coated pilaster floor fixing, internal handle, magnetic catches, coat hook, channel bracket partition fixings
Hardware finish:
Polished
Height option A:
1100 mm overall height including 100 mm floor clearance
Height option B:
1350 mm overall height including 100 mm floor clearance
Door configuration:
Outward opening doors for ambulant and enlarged cubicles where required
Accessibility clearance:
450 mm diameter manoeuvring space possible with inward opening doors
Design features:
Curved doors and pilasters with partitions sweeping upward toward pilasters
Year:
2023
Manufacturer:
Schäfer Trennwandsysteme GmbH
Location:
Horhausen, Germany
Model:
EF-3 WK ZF
Standards and Certifications:
TÜV GS, PEFC/04-31-3143, FSC-C147242, DIN EN 438-7, DIN EN 10088, ASTM A276, AISI 304, DIN EN 573, DIN EN 755, DIN 17611 E6/EV1, DIN EN 12206-1, REACH, CLP regulation
Material:
HPL panels, aluminum, stainless steel, polyurethane foam
Construction Type:
Sandwich panel, aluminum frame, moisture-resistant, rot-proof
Fire Protection:
Euroclass EN 13501-1 C-s2,d0 (optional flame-resistant elements)
Door Mechanism:
Integrated tenon hinge, adjustable, self-closing
Feet and Locking:
Central cubic leg, height-adjustable anodized aluminum, under-bench central locking
Accessories:
Hooks, door buffers, comb shelf, glass mirror, swimming pool hangers, toilet accessories
Color Options:
Panels and hardware per manufacturer color chart, anodized aluminum and powder coating
Document Type:
Technical specification sheet
Date of Publication:
February 2023
Product reference:
function hpl pf toilet cubicles
Product type:
Unframed panel toilet cubicles
Classification code:
K32 Panel Cubicles 120
Manufacturer:
Formwise Washrooms Ltd
Manufacturer address:
Unit 3 Wendel Point, Park Farm, Wellingborough, Northamptonshire NN8 6BA
Contact telephone:
01933 405961
Contact fax:
01933 405971
Email:
[email protected]
Website:
www.formwise-washrooms.co.uk
Panels and doors material:
18mm moisture resistant chipboard faced both sides with high pressure laminate (HPL)
Core material:
Moisture resistant chipboard to V313
Surface finish:
Velour
Colour specification:
Colour to be confirmed from Formwise Washrooms HPL selection
Edge treatment (panels and doors):
Matching or contrasting durable 1mm PVC lipped edges
Pilasters material:
18mm moisture resistant chipboard faced both sides with high pressure laminate (HPL)
Pilasters edge treatment:
Vertical edges postformed to form continuous radius
Headrails:
Rigid polished aluminium section with bull-nosed leading edge
Legs:
Polished aluminium rectangular design, partition fixed, adjustable for floor levels
Ironmongery and accessories:
Aluminium pivot hinges, coat hook, DDA compliant slide operated indicator bolt with elliptical face plate, emergency release facility, channel bracket partition fixings
Hardware finish:
Polished aluminium
Overall height:
1980mm including 160mm floor clearance
Accessibility features:
DDA compliant indicator bolt and layout allowance for manoeuvring space
Door configuration:
Outward opening doors to ambulant and enlarged cubicles where required
Internal manoeuvring space:
450mm diameter within cubicle for inward opening door layouts