№ files_lp_4_process_1_36516
File format: docx Character count: 9847 File size: 37 KB
Technical specification for coated glass-mat faced polyisocyanurate rigid foam board insulation outlining product characteristics, installation requirements, compliance standards, and submittal procedures for construction projects.
Year: 2026
Region / City: Not specified
Subject: Building insulation materials
Document Type: Technical specification
Organization / Institution: Atlas Roofing Corporation
Author: Not specified
Target Audience: Specification writers and construction professionals
Applicable Period: Project-specific
Approval Date: Not specified
Revision Date: Not specified
Material Standards: CAN/ULC S704-03, ASTM D 1621, ASTM D 1623, ASTM C 203, ASTM D 2842, ASTM D 2126, ASTM E 96
Fire Performance: Flame spread less than 500, Smoke developed <500
Board Sizes: 1219 mm x 2438 mm, 1219 mm x 2743 mm, 406 mm x 2438 mm, 610 mm x 2438 mm
Thickness Options: 13 mm, 19 mm, 25 mm, 38 mm, 51 mm, 64 mm, 76 mm, 89 mm, 102 mm
Thermal Performance: RSI values from 0.53 to 4.40, R-values from 3.0 to 25
Compressive Strength: >140 kPa
Tensile Strength: >35 kPa
Flexural Strength: >275 kPa
Water Vapour Permeance: >60 ng/(Pa s m2)
Water Absorption: <3.5% by volume
Dimensional Stability: <1% linear change
Service Temperature Range: -73ºC to +122ºC
Sustainability: Produced without HCFC, CFC, HFC blowing agents
Submittals: Product test reports, data sheets, samples, LEED documentation if applicable
Waste Management: Separate and recycle materials per project requirements
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
USG Durock Brand Glass-Mat Tile Backerboard
Year: 2014
Region / City: North America
Topic: Building Materials / Tile Backerboard
Document Type: Product Specification
Organization / Institution: USG Corporation
Author: USG Corporation
Target Audience: Architects, Engineers, Contractors
Period of Validity: Ongoing
Approval Date: Not specified
Date of Changes: Not specified
Note: Context Description
SECTION 09 29 00 – GYPSUM BOARD, 1/2 in. (12.7 mm) and 5/8 in. (15.9 mm) USG Securock® Brand UltraLight Glass-Mat Sheathing (Regular and Firecode® X)
Year: 2023
Region / City: United States
Topic: Gypsum Board, Glass-Mat Sheathing
Document Type: Product Specification
Organization / Institution: USG Corporation
Author: USG
Target Audience: Architects, Engineers, Contractors, Design Professionals, Building Code Officials
Validity Period: 5 years
Approval Date: Not specified
Amendment Date: Not specified
Document Classification: Technical Specification
Context Description: Technical product specification for USG Securock® Brand UltraLight Glass-Mat Sheathing, including installation guidelines and compliance with ASTM standards.
GYPSUM BOARD, 1 in. (25.4 mm) USG Sheetrock® Brand Glass-Mat Liner Panels Mold Tough® (UL Type SLX)
Note: Year
Certification: GREENGUARD Gold Certification, CA 01350 compliant
Product Dimensions: 1 in. (25.4 mm) thickness, various lengths
Product Weight: 4.0 lb./sq. ft. (19.5 kg/sq. m.)
Fire Resistance: Meets ASTM E136, ASTM E84
Moisture Resistance: Meets ASTM C1658, ASTM C3273
Warranty: 5 years manufacturing defects, 12-month limited exposure
Testing Compliance: ASTM C473, ASTM D3273, ASTM C840
Design Basis: USG Sheetrock® Brand Glass-Mat Liner Panels Mold Tough®
WHO PQT-VC Declaration of Product Formulation for Coated ITN Fabric
Note: Year
Principle to Remove Antibody from Coated Red Cells
Year: 2014
Region / city: Bethesda, MD
Topic: Hematology, Immunohematology, Laboratory Procedures
Document Type: Procedure Manual
Organization / Institution: American Association of Blood Banks
Author: Roback JD
Target Audience: Laboratory personnel, medical professionals
Period of validity: Ongoing, as of revision date
Approval Date: March 1, 2014
Date of Changes: March 1, 2014
References: AABB Technical Manual, 17th ed., Methods in Immunhematology 3rd ed., Standards for Hospital Transfusion Services Version 3
Scope: The document provides instructions for the removal of antibodies from coated red blood cells using freeze-thaw elution techniques, specifically for investigating ABO hemolytic disease of the fetus and newborn.
SECTION 33 47 16 Temporary Exposed Geomembrane Cover Using Woven Coated Polyethylene
Section Number: 33 47 16
Title: Temporary Exposed Geomembrane Cover Using Woven Coated Polyethylene
Product Name: RhinoSkin™ Woven Coated Polyethylene Geomembrane
Material Type: Woven Coated Polyethylene (WCPE)
Available Thicknesses: 12 mil, 16 mil, 20 mil, 24 mil
Standards Referenced: ASTM D751; ASTM D4218; ASTM D4355; ASTM D4833; ASTM D5261; ASTM E96; ASTM G154
Manufacturer: Owens Corning
Manufacturer Address: One Owens Corning Parkway, Toledo, OH 43659
Application: Temporary Exposed Geomembrane Cover (TEGC)
Warranty Period: 1.5, 2, 2.5, or 10 years (exposed applications)
Quality Requirements: Manufacturer Quality Control Program and Certificate of Compliance required
Minimum Manufacturer Experience: 5 years continuous production; 5,000,000 square feet produced in last 5 years
Minimum Fabricator Experience: 5 years continuous fabrication; 5,000,000 square feet fabricated in last 5 years
Minimum Installer Experience: 5 years continuous installation; 5,000,000 square feet installed in last 5 years
Labeling Requirements: Manufacturer name, fabricator name (if applicable), product identification, production date, thickness, roll dimensions, roll or panel number, deployment instructions
Storage Requirements: Protected from damage; sacrificial cover required if stored on site more than six months; maximum stacking three rolls high
Testing Requirements: Physical and mechanical properties verified by ASTM test methods
Intended Use: Exposed geomembrane liner applications
In Vitro Antimicrobial Activity of Vinca Alkaloids Coated Green Synthesized Silver Nanoparticles Against Selected Foodborne Gram-negative Pathogen
Year: 2024
Region / City: Global
Topic: Antimicrobial Activity, Silver Nanoparticles, Green Synthesis
Document Type: Research Article
Organization / Institution: Not specified
Author: Not specified
Target Audience: Researchers, Scientists in Biotechnology, Microbiology, and Nanotechnology
Period of Validity: Not applicable
Approval Date: Not specified
Modification Date: Not specified
Topics: Polyisocyanurate Glass-Mat Coated