№ lp_1_2_15900
File format: docx
Character count: 19101
File size: 113 KB
Technical specification detailing the selection, installation, substrate compatibility, joint design, and performance testing of the ACF Direct Finish System for soffits and ceilings.
Year:
2026
Region / City:
Lyndhurst, NJ, USA
Subject:
Building construction materials and finishing systems
Document Type:
Technical specification
Organization / Institution:
Sika Corporation US, Parex brand
Intended Audience:
Design professionals, architects, contractors
Scope:
Application and installation guidelines for soffits and ceilings finishing system
Related Standards:
ASTM C1325, ASTM C1177, ASTM C931, ASTM C1396, ASTM C1382, ASTM E84, ASTM D2247, ASTM B117, Mil. Std. 810B Method 508, ASTM D968, ASTM G53
Components:
Base coat, reinforcing mesh, finish coat, substrates, sealants
Submission Requirements:
Product data, samples, certificates, field samples
Quality Assurance:
Manufacturer and applicator qualifications, testing criteria and results
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Year:
2023
Region / City:
Houston, Texas
Subject:
Electrical Engineering, Power Distribution
Document Type:
Technical Specification
Organization / Institution:
University of Houston, Texas Facilities Commission
Author:
Not specified
Target Audience:
Engineers, Contractors, Electrical professionals
Validity Period:
Not specified
Approval Date:
Not specified
Revision Date:
Not specified
Year:
2023
Region / City:
N/A
Theme:
Aluminum Siding Installation
Document Type:
Specification Guide
Organization / Institution:
MAIBEC
Author:
N/A
Target Audience:
Specifiers, Contractors
Period of Validity:
N/A
Approval Date:
N/A
Revision Date:
N/A
Year:
2021
Region / City:
Houston, Texas
Subject:
Acoustical finish system, Spray-applied cellulose
Document Type:
Product Specification
Organization / Institution:
International Cellulose Corporation
Author:
International Cellulose Corporation
Target Audience:
Contractors, Architects, Builders
Validity Period:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Environmental Certification:
Cradle to Cradle® Certified v.3.1 (Bronze)
UL Certification:
UL GREENGUARD Gold Certified
Health Product Declaration:
Available
Fiber Recycled Content:
75%
No Urea-Formaldehyde Resins:
Yes
Year:
2025
Region / City:
United Kingdom
Subject:
Aseptic pharmacy services, Quality assurance
Document Type:
Role description, Call for applications
Organization:
Royal Pharmaceutical Society (RPS)
Author:
RPS
Target Audience:
Pharmacists, pharmacy technicians, microbiologists, pharmaceutical scientists, experts in aseptic services
Period of Validity:
Indefinite
Approval Date:
Not specified
Modification Date:
Not specified
Year:
2022
Organization:
UKA / World Athletics / WPA
Document Type:
Examination questions
Subject:
Photo Finish and Athletics Rules
Target Audience:
Level 4 Athletics Officials
Applicable Rules:
WA, UKA, WPA
Deadline:
September 1st, 2022
Context:
Indoor and outdoor track events, para-athletics included
Year:
2023
Region / City:
N/A
Subject:
Interior finish carpentry
Document Type:
Specification
Organization / Institution:
N/A
Author:
N/A
Target Audience:
Contractors, architects, builders
Period of Validity:
N/A
Approval Date:
N/A
Date of Amendments:
N/A
DS939OUTSULATION® PLUS MD SYSTEMAn Exterior Wall Insulation and Finish System with Moisture Drainage
Year:
2026
Region / City:
N/A
Theme:
Insulation Systems
Document Type:
Guide Specification
Organization / Institution:
Dryvit Systems, Inc.
Author:
Dryvit Systems, Inc.
Target Audience:
Design and construction professionals
Effective Period:
N/A
Approval Date:
N/A
Date of Changes:
N/A
Note:
Year
Year:
2020
Region / City:
Canada
Theme:
Construction Materials
Document Type:
Technical Specification
Organization / Institution:
MAIBEC
Author:
MAIBEC
Target Audience:
Specifiers, Architects, Builders
Effective Period:
Ongoing
Approval Date:
Not specified
Amendment Date:
Not specified
Year:
2021
Region / City:
West Warwick, RI
Topic:
Exterior Insulation and Finish Systems (EIFS)
Organization:
Dryvit Systems, Inc.
Author:
Dryvit Systems, Inc.
Target Audience:
Design and construction professionals
Effective Period:
Not specified
Approval Date:
Not specified
Date of Changes:
Not specified
Related Standards:
ASTM B 117, ASTM C 67, ASTM C 150, ASTM C 297, ASTM C 510, ASTM C 518, ASTM C 639, ASTM C 661
Construction Phases:
Design, Specification, Installation
Safety Warning:
Adherence to specification necessary to prevent water intrusion
Contextual Description:
This document provides detailed manufacturer’s guidelines and specifications for installing the Outsulation MD System, an exterior insulation and finish system with moisture drainage, intended for use by design and construction professionals.
Note:
Prologue
Why, Vasher thought, do so many things begin with me getting thrown into prison? The guardsmen laughed to one another outside, slamming the cell door shut with a clang. Vasher stood and duste:
land of Returned Gods, Lifeless servants, BioChromatic research, and--of course--color. The large guard sauntered toward the cell, leaving his friends to their fun with Vasher’s pack. “They say you’re pretty tough,” the man said, sizing up Vasher. Vasher did not respond. “The bartender says you beat down some twenty men in the brawl.” The guard rubbed his chin. “You don’t look that tough to me.” Vasher shrugged. The guard snorted. “You should have known better than to strike a priest. The others, they’ll spend a night locked up. You, though--you’ll hang. Colorless fool.” Vasher turned away, looking over his cell. It was functional, if unoriginal. A thin slit in the top let in light, the stone walls dripped with water and lichen, and a pile of dirty straw decomposed in the corner. “You ignoring me?” the guard asked, stepping closer to the bars. As he did so, the colors of his uniform brightened faintly, like he’d stepped into a stronger light. The change was slight. Vasher didn’t have much Breath remaining. The guard didn’t notice the change in color--just like he hadn’t noticed back in the bar, when he and his buddies had picked Vasher up off the floor and thrown him in their cart. He’d soon wish that he’d been more observant. “Here, now,” one of the men said from behind. “What’s this?” Those two were still looking through Vasher’s pack. Vasher had always found it odd that the men who patrolled dungeons tended to be as bad, or worse, than the men they guarded. Perhaps that was intentional. Society didn’t seem to care if such men were outside the cells or in them--just as long as they were kept away from more honest men. Assuming that such a thing existed. A guard pulled a long object--wrapped in white linen--free from Vasher’s bag. The man frowned at the object, then unwrapped it, revealing a large, thin-bladed sword in a silver sheath. The hilt was pure black. The guard whistled quietly. “Who do you suppose he stole this from?” The lead guard eyed Vasher again, frowning. He was likely wondering if Vasher might be some kind of nobleman. Though such things didn’t really exist in Hallandren, many neighboring kingdoms had their lords and ladies. Yet, what lord would wear a drab brown cloak, ripped in several places? What lord would sport bruises from a bar fight, a half-grown beard, and boots worn from years of walking? Eventually, the guard turned away, apparently convinced that Vasher was no lord. He was right. And he was wrong. “Let me see that,” t
Unit code:
PPL3PC17 (HK82 04)
Subject area:
Complex pastry preparation and cooking
Topic:
Preparation, cooking and finishing of complex pastry products
Document type:
Vocational qualification unit assessment record
Qualification sector:
Hospitality and catering
Assessment method:
Workplace observation, questioning and witness testimony
Components:
Performance criteria, scope and range, knowledge and understanding, evidence records
Products referenced:
apple strudel, barquettes, samosas, tarte tatin, Paris Brest, custard tarts
Pastry types:
short, sweet, suet, choux, puff or flaky, sable, convenience, hot water paste
Techniques covered:
weighing, sifting, rubbing in, creaming, kneading, resting, aerating, chilling, piping, laminating, rolling, folding, lining, trimming, baking
Food safety aspect:
storage of cooked pastry products in line with food safety regulations
Roles referenced:
candidate, assessor, internal verifier, external verifier
Purpose:
recording and verification of candidate competence in preparing complex pastry products
Note:
Year
Document Type:
Educational Plan
Target Audience:
Students
Context:
Weekly lesson plan for second-grade students with activities involving reading, writing, auditory tasks, and drawing exercises.
Year:
2026
Region / City:
United States
Subject:
Exterior insulation and finish system design and installation
Document Type:
Technical specification
Organization / Institution:
Sika Corporation US, Senergy® Brand
Author:
Sika Technical Department
Target Audience:
Architects, engineers, specifiers, and contractors
Design Responsibility:
Specifier and purchaser
Installation Requirements:
Substrate preparation, moisture control, impact resistance, color selection, system joints, grade condition, projecting features
Applicable Standards:
ASTM C1325, ASTM C1177, ASTM C79, ASTM C1396, ASTM C1382
Period of Validity:
Ongoing until updated
Date of Issue:
2026
Year:
2026
Type of document:
Product specification
Product name:
Be-Line drop-down support rail
Material:
Aluminium with powder-coated matte white finish
Dimensions:
650 x 210 x 120mm
Diameter:
Ø 42mm
Weight capacity:
tested over 200kg, recommended maximum 135kg
Features:
anti-bacterial treatment, ergonomic flat front face, removable with anti-theft locking, concealed fixings
Applications:
WCs, showers, hotels, hospitals, facilities for people with reduced mobility
Certifications:
CE marked
Warranty:
30 years
Year:
2022
Location:
Haverhill, MA / Haarlem, Netherlands
Topic:
Sports technology, photo finish, timing systems
Document type:
Press release
Organizations:
Lynx System Developers, MYLAPS Sports Timing
Authors:
Edward Evansen, Camiel Slaats
Target audience:
Athletes, racers, event organizers, sports fans
Partnership duration:
Multi-year
Contact:
Krijn Snuif, Marketing Manager at MYLAPS, [email protected], +31 (0)6 29 72 18 59