№ files_lp_3_process_9_69680
File format: docx Character count: 7127 File size: 52 KB
Technical construction specification section outlining material requirements, standards, surface preparation, application procedures, and quality assurance provisions for latex-based masonry waterproofing coatings manufactured by United Gilsonite Laboratories.
Document Type: Guide Specification Section
Section Number: 07 16 13
Product Name: DRYLOK® Latex Base Powdered Masonry Waterproofer
Manufacturer: United Gilsonite Laboratories (UGL)
Manufacturer Address: 1396 Jefferson Avenue, P.O. Box 70, Scranton, PA 18501
Industry Standards Referenced: ASTM D 16; ASTM D 1653 Method A; ASTM D 6904; ASTM D 7088; NSF/ANSI 61
Applicable Substrates: Concrete, cement, brick, stone, concrete block masonry
Application Areas: Below and above grade exterior and interior surfaces; water tanks, cisterns, pools, lagoons, ponds, fountains
Color: White
Coverage Rate: 140–210 sq. ft./U.S. gal. (base coat); 210–280 sq. ft./U.S. gal. (second coat)
Required Coats: Two coats minimum
Curing Time Before Immersion: 7 to 10 days
Temperature Application Range: 50°F to 90°F (10°C to 32°C)
Referenced Specification Sections: 01 30 00; 01 40 00; 01 60 00; 01 70 00; 03 30 00; 03 41 00; 03 47 13; 04 21 00; 04 22 00; 09 97 26
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Section 07 19 00 – DRYLOK® Siloxane 7 Brick & Masonry Penetrating Sealer
Product Name: DRYLOK® Siloxane 7 Brick & Masonry Penetrating Sealer
Section Number: 07 19 00
Manufacturer: United Gilsonite Laboratories (UGL)
Manufacturer Address: 1396 Jefferson Avenue, P.O. Box 70, Scranton, PA 18501
Contact Information: 1-800-845-5227; 1-570-344-1202; [email protected]
Note: ; www.ugl.com
Type of Document: Guide Specification
Applicable Standards: ASTM D 16; ASTM D 5095; ASTM D 6904
Related Sections: 03 30 00; 03 41 00; 03 47 13; 04 21 00; 04 22 00; 07 16 13; 09 97 26
Product Type: Water-based silane/siloxane penetrating sealer
Intended Use: Sealing exterior brick and masonry surfaces
Application Method: Brush or low-pressure spray
Color: Clear
Environmental Limitations: Do not apply in rain; temperature limits 50°F–90°F (10°C–32°C)
Substitutions: Not Permitted
Field Requirements: Mock-up required; architect approval required
Mixing Requirements: Stir thoroughly; thinning prohibited
Document Scope: Exterior masonry surface treatment specification
Topics: Powdered Waterproofer DRYLOK