№ lp_1_2_02216
File format: docx Character count: 2788 File size: 148 KB
Technical specification annex defining requirements, geometry, mechanical constraints, and compatibility conditions for a custom-made oscillation system integrated with a radial collimator in a neutron diffraction setup.
Type of document: Technical specification annex
Subject: Design and manufacture of an oscillation system for a radial collimator
Intended use: Neutron diffractometer for scanning deformations
Device: Oscillation system of a radial collimator
Collimator type: Horizontally and vertically convergent radial collimator
Horizontal angle range: 14.456 degrees
Vertical angle range: 12.27 degrees
Focal length L1: 170 mm
Number of channels: 31
Number of foils: 30
Middle foil length: 350 mm
Resolution at focus: FWHM = 2 mm at neutron wavelength > 0.1 nm
Full width at half maximum: 2.00 mm × 0.669 degree
Total sample–detector distance: 1,000 mm
Oscillation range requirement: At least three collimator apertures
Mechanical constraint: Distance from detector arm to central horizontal detector axis 225 mm
Drive system: Stepper motor with encoder
Controller compatibility: Nanotec SMCI 33-2 or SMCI 47-S-2
Design documentation: To be created by the supplier
Legal reference: Act No. 134/2016 Coll., § 89, para. 6
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.

Don’t have cryptocurrency yet?

You can still complete your purchase in a few minutes:
  1. Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
  2. In the app, tap Send.
  3. Select network, paste our wallet address.
  4. Send the exact amount shown above.
After sending, paste your TXID (transaction ID) and your email to receive the download link. Need help? Contact support and we’ll guide you step by step.

The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Magnetic Resonance Imaging to estimate Tissue deformations during penile clamp application: A case series
Year: 2026
Region / City: Southampton, UK; Tel Aviv, Israel; Bristol, UK
Subject: Urology; Medical Imaging; Post-Prostatectomy Care
Document Type: Peer-reviewed journal article (accepted draft)
Institution: University of Southampton, Tel Aviv University, University Hospital Southampton, University of Bristol
Authors: J. Lemmens, L. Peko Cohen, PR Worsley, C. Everitt, J. Broadbridge, A. Gefen, RW Rees, M. Drake, MC Macaulay, M. Fader, DL Bader
Corresponding Author: PR Worsley
Methodology: Case series using MRI to measure tissue deformation under penile clamp application
Study Population: Three males post-radical prostatectomy with urinary incontinence
Keywords: Penile Clamp; Magnetic Resonance Imaging; Radical Prostatectomy; Urinary Incontinence
Level of Evidence: 4
Ethics Approval: Faculty of Health Sciences reference: 23407
Device Types Tested: Dribblestop® and Wiesner clamps (MRI-compatible modifications)
Age Range of Participants: 69–78 years
Purchase Contract for Manufacture and Delivery of a Safety Shutter for the BEER Diffractometer at the European Spallation Source
Year: 2021
Jurisdiction: Czech Republic
Governing law: Act No. 89/2012 Coll., Civil Code
Type of document: Purchase contract
Buyer: Nuclear Physics Institute of the Czech Academy of Sciences, public research institution
Seller: Unspecified supplier selected through public procurement
Project: European Spallation Source (ESS) – BEER instrument
Subject matter: Manufacture and delivery of a safety shutter system
Funding source: ESS project funds
Procurement procedure: Below-the-limit public contract, open procedure
Related agreements: In-Kind Contribution Agreement including Schedule NSS 6.6 #4
Annexes: Technical specifications, project schedule, incentive and risk management instruments
Purpose: In-kind contribution by the Czech Republic to ESS infrastructure
Legal status of buyer: Non-entrepreneur in relation to the contract
Contractual priorities: Buyer-favourable specifications prevail
X-RAY DIFFRACTOMETER REQUEST AND REPORT FORMS
Year: 2026
Institution: University of the West Indies
Department: Physics
Document Type: Laboratory Request and Report Forms
Intended Users: Clients submitting samples for X-ray diffraction analysis, Laboratory Technicians, Supervisors
Scope: Qualitative and Quantitative Analysis of samples
Data Recorded: Client information, sample details, request date, job performance date, preparation time, archival reference, attached analysis
Approval Required: Supervisor signature
Cost Information: Rate per sample for qualitative and quantitative analysis
Submission Requirements: Adequate sample quantity, accurate job details, sample collection/disposal instructions
Source Location: As provided by client
Topics: Collimator Deformations Diffractometer