№ lp_2_1_01789
File format: docx
Character count: 2321
File size: 109 KB
Technical product specification defining materials, construction requirements, performance criteria, and compliance standards for the EconoDrain® Series #12 pre-engineered trench drain system.
Product Name:
EconoDrain® Series #12
System ID#:
EconoDrain Series #12
Document Type:
Standard Specification
Manufacturer:
MultiDrain Systems, Inc.
Manufacturer Address:
1405 Industrial Drive; Statesville, NC 28625
Contact Information:
Toll Free 800-433-1119; Tel 704-508-1010; Fax 704-508-1011
Email:
[email protected]
Website:
www.multidrainsystems.com
Product Description:
12” (304 mm) Trench ID Pre-engineered Trench Drain Forming System
Slope:
0.5 percent (1/16 inch per lineal foot)
Section Length:
8 feet (2438 mm)
Form Material:
Non-CFC Expanded Polystyrene Foam (EPS)
Grate Type:
EG-1436-HGBG Banded Bar Grate
Grate Material:
Steel, Hot Dip Galvanize
Grate Size:
14” Wide x 36” Long x 1-1/2”
Load Rating:
AASHTO M306-H20
Applicable Standards:
ASTM E-84; ASTM A36; ASTM A276; AASHTO M-306
Quality Assurance:
Certificate of Compliance required; independent grate testing to AASHTO M-306
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Document Type:
Technical standard specification
Product Name:
EconoDrain® Series #10
System ID:
EconoDrain Series #10
Manufacturer:
MultiDrain Systems, Inc.
Manufacturer Address:
1405 Industrial Drive, Statesville, NC 28625
Contact Information:
Toll Free 800-433-1119; Tel 704-508-1010; Fax 704-508-1011
Email:
[email protected]
Website:
www.multidrainsystems.com
Product Description:
10 inch (254 mm) pre-engineered trench forming system with banded bar grate
Construction Material:
Non-CFC Expanded Polystyrene Foam (EPS), steel, stainless steel
Standard Slope:
0.5 percent (1/16 inch per lineal foot)
Section Length:
8 feet (2438 mm)
Grate Model:
EG-1236-HPBG
Grate Type:
Banded Bar Grate
Grate Material:
Steel, Shop Black
Grate Dimensions:
12 inches wide x 36 inches long x 1-1/2 inches
Grate Slot Size:
1-3/16 inch x 4 (O.C.) / 19-W-4
Open Area:
67.5%
Load Rating:
AASHTO M306-H20
Testing Standard:
ASTM E-84; AASHTO M-306
Quality Assurance:
Certificate of Compliance required; independent load testing specified
Note:
Year
Topic:
Drainage System
Document Type:
Technical Specification
Organization / Institution:
MultiDrain Systems, Inc.
Target Audience:
Specifiers, Engineers
Product ID:
MultiDrain® Series 600
Trench Grate Loading:
AASHTO M306-H20
Material:
Steel, Hot Dipped Galvanize
Coating:
304 Stainless Steel - Mill Finish (Optional)
Gauge:
16 ga (1.5 mm) (Standard)
Grate Type:
Banded Bar Grate
Grate Size:
8” Wide x 36” Long x 1-1/2”
Grate Slot Size:
1-3/16” x 4” (O.C.)
Open Area:
66%
Load Rating:
AASHTO M306-H20
Quality Assurance:
Certificate of Compliance Required
Year:
Not specified
Region / City:
Statesville, NC
Topic:
Drainage systems
Document Type:
Product specification
Organization:
MultiDrain Systems, Inc.
Author:
Not specified
Target Audience:
Engineers, contractors, designers
Effective Period:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Year:
2008-2017
Region / City:
Lester Prairie, MN
Theme:
Pre-engineered building systems
Document type:
Technical specification
Organization / Institution:
Lester Building Systems
Author:
Lester Building Systems
Target audience:
Specifiers, architects, engineers
Period of validity:
Not specified
Approval date:
Not specified
Date of changes:
Not specified
Note:
Year
Topic:
Drainage Systems, Trench Drains, Construction Materials
Document Type:
Technical Specification
Organization / Institution:
MultiDrain Systems, Inc.
Target Audience:
Engineers, Contractors
Document Type:
Technical standard specification
Product Name:
EconoDrain® Series #10
System ID:
EconoDrain Series #10
Manufacturer:
MultiDrain Systems, Inc.
Manufacturer Address:
1405 Industrial Drive, Statesville, NC 28625
Contact Information:
Toll Free 800-433-1119; Tel 704-508-1010; Fax 704-508-1011
Email:
[email protected]
Website:
www.multidrainsystems.com
Product Description:
10 inch (254 mm) pre-engineered trench forming system with banded bar grate
Construction Material:
Non-CFC Expanded Polystyrene Foam (EPS), steel, stainless steel
Standard Slope:
0.5 percent (1/16 inch per lineal foot)
Section Length:
8 feet (2438 mm)
Grate Model:
EG-1236-HPBG
Grate Type:
Banded Bar Grate
Grate Material:
Steel, Shop Black
Grate Dimensions:
12 inches wide x 36 inches long x 1-1/2 inches
Grate Slot Size:
1-3/16 inch x 4 (O.C.) / 19-W-4
Open Area:
67.5%
Load Rating:
AASHTO M306-H20
Testing Standard:
ASTM E-84; AASHTO M-306
Quality Assurance:
Certificate of Compliance required; independent load testing specified
Year:
2026
Manufacturer:
MultiDrain Systems, Inc.
Location:
Statesville, NC, USA
System ID:
EconoDrain DG-4
Type:
Technical specification
Material:
EPS foam, Mild steel, Stainless steel, Vinyl ester FRP
Grate dimensions:
39.19” (1 meter), 19.6” (1/2 meter)
Slope:
0.5% (1/16 inch per linear foot)
Installation section length:
78-3/8 inches (2 meters nominal)
Standards:
ASTM E-84, AASHTO M-306
Load resistance:
Minimum 150 psi proof load
Quality assurance:
Certificate of Compliance required, independent testing of grates
Intended use:
Industrial trench drainage
Note:
Year
Topic:
Drainage Systems, Trench Drains, Construction Materials
Document Type:
Technical Specification
Organization / Institution:
MultiDrain Systems, Inc.
Target Audience:
Engineers, Contractors
Document Type:
Technical standard specification
Product Name:
EconoDrain® Series #10
System ID:
EconoDrain Series #10
Manufacturer:
MultiDrain Systems, Inc.
Manufacturer Address:
1405 Industrial Drive, Statesville, NC 28625
Contact Information:
Toll Free 800-433-1119; Tel 704-508-1010; Fax 704-508-1011
Email:
[email protected]
Website:
www.multidrainsystems.com
Product Description:
10 inch (254 mm) pre-engineered trench forming system with banded bar grate
Construction Material:
Non-CFC Expanded Polystyrene Foam (EPS), steel, stainless steel
Standard Slope:
0.5 percent (1/16 inch per lineal foot)
Section Length:
8 feet (2438 mm)
Grate Model:
EG-1236-HPBG
Grate Type:
Banded Bar Grate
Grate Material:
Steel, Shop Black
Grate Dimensions:
12 inches wide x 36 inches long x 1-1/2 inches
Grate Slot Size:
1-3/16 inch x 4 (O.C.) / 19-W-4
Open Area:
67.5%
Load Rating:
AASHTO M306-H20
Testing Standard:
ASTM E-84; AASHTO M-306
Quality Assurance:
Certificate of Compliance required; independent load testing specified
Note:
Year
Topic:
Drainage System
Document Type:
Technical Specification
Organization / Institution:
MultiDrain Systems, Inc.
Target Audience:
Specifiers, Engineers
Product ID:
MultiDrain® Series 600
Trench Grate Loading:
AASHTO M306-H20
Material:
Steel, Hot Dipped Galvanize
Coating:
304 Stainless Steel - Mill Finish (Optional)
Gauge:
16 ga (1.5 mm) (Standard)
Grate Type:
Banded Bar Grate
Grate Size:
8” Wide x 36” Long x 1-1/2”
Grate Slot Size:
1-3/16” x 4” (O.C.)
Open Area:
66%
Load Rating:
AASHTO M306-H20
Quality Assurance:
Certificate of Compliance Required
Year:
Not specified
Region / City:
Statesville, NC
Topic:
Drainage systems
Document Type:
Product specification
Organization:
MultiDrain Systems, Inc.
Author:
Not specified
Target Audience:
Engineers, contractors, designers
Effective Period:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified