№ files_lp_4_process_3_088274
File format: docx
Character count: 12515
File size: 35 KB
Technical equipment specification describing the configuration, components, materials, installation requirements, and operating conditions for a factory-assembled immersible hydraulic fuel oil pump system designed to supply fuel to emergency generators or boilers in flood-prone environments.
Manufacturers:
Critical Fuel Systems; Viking Pump; IMO Pump
Product Model:
True Guard (TG-XXXX-YYY-ZD)
Document Type:
Technical specification
System Type:
Automatic fuel oil transfer and monitoring system
Application:
Emergency generators and boilers
Pump Configuration:
Duplex or simplex hydraulic fuel oil pump set
Hydraulic Power Unit Location:
Above flood plain
Hydraulically Powered Fuel Pump Location:
Flood-prone area
Operating Condition:
Flooded environments including polluted water and salt water
Maximum Submergence Depth:
Up to 90 feet
Pump Type:
Positive displacement hydraulic drive pump and fuel oil pump
Pump Housing Material:
Cast iron
Prohibited Materials:
Aluminum, brass, bronze housings or rotors; galvanized pipe or fittings
Piping Specification:
Schedule 40 or heavier black pipe suitable for fuel oil
Valve Types:
Ball isolation valves (600 WOG) and spring check valves (Class 125#)
Hydraulic Fluid Recommendation:
Bio-Fleet Hydraulic Fluid ISO 32 or mineral oil
Electrical Control System:
PLC-based controller with 10-inch touch screen interface
Control Modules:
Electrical Motor Controller Module and 24 VDC Logic Control Module
Compliance Standard:
NFPA 70E
System Configuration:
Factory-assembled packaged unit with field connection of hydraulic piping and sensor wiring
Testing Requirement:
Factory fabricated, tested, and certified as a complete unit
Finish:
Industrial enamel coating
Associated Equipment:
Day tank controls and sensors from the same manufacturer for generator applications
Price: 8 / 10 USD
The file will be delivered to the email address provided at checkout within 12 hours.
The file will be delivered to the email address provided at checkout within 12 hours.
Don’t have cryptocurrency yet?
You can still complete your purchase in a few minutes:- Buy Crypto in a trusted app (Coinbase, Kraken, Cash App or any similar service).
- In the app, tap Send.
- Select network, paste our wallet address.
- Send the exact amount shown above.
The final amount may vary slightly depending on the payment method.
The file will be sent to the email address provided at checkout within 24 hours.
The product description is provided for reference. Actual content and formatting may differ slightly.
Year:
2026
Publication date:
December 2025
Document type:
Handbook
Series:
NIST Handbook
Handbook number:
NIST HB 133-2026
Organization:
National Institute of Standards and Technology
Department:
U.S. Department of Commerce
Laboratory:
Physical Measurement Laboratory
Office:
Office of Weights and Measures
Adopting body:
National Council on Weights and Measures
Adoption event:
110th Annual Meeting, July 2025
Authors:
John T. McGuire; David A. Sefcik; Loren Minnich; Elizabeth J. Benham; Isabel Chavez Baucom; Katrice A. Lippa
Supersedes:
NIST Handbook 133-2025 (December 2024)
Approval date:
2025-11-13
DOI:
10.6028/NIST.HB.133-2026
Place of publication:
Gaithersburg, MD
Intended audience:
State, local, and federal weights and measures officials; commercial and industrial establishments
Measurement systems:
SI units with U.S. customary units
Keywords:
count; labeling; measures; packaging; testing procedures; testing methods; weight; volume; length; scale; area; thickness
Year:
2023
Region / city:
Victoria, Australia
Subject:
Liquor licensing
Document type:
Guide
Agency / institution:
Liquor Control Victoria (LCV)
Author:
Liquor Control Victoria (LCV)
Target audience:
New and existing licensees, staff working at stores with packaged liquor or late night liquor licences
Effective period:
Not specified
Approval date:
Not specified
Amendment date:
Not specified
Year:
2024
Region / City:
United States
Topic:
Cloud-based applications, service offerings
Document Type:
White Paper
Organization / Institution:
ServiceNow
Author:
G. Michael Carroll, Principal Solution Architect
Target Audience:
Customers, ServiceNow Partners, ServiceNow staff
Effective Period:
2024
Approval Date:
15JUL2024
Modification Date:
N/A
Note:
Year
Topic:
Food Safety, HACCP
Document Type:
HACCP Plan
Year:
2018
Region / city:
Kigali, Rwanda
Theme:
Food industry standards
Document type:
Standard
Organization / institution:
Rwanda Standards Board
Author:
Rwanda Standards Board
Target audience:
Stakeholders in the food industry
Period of validity:
To be determined
Approval date:
To be determined
Amendment date:
To be determined
Relevant documents:
EAS 23, Timber - Dimensions for coniferous sawn timber
Objective:
Quality requirements for packaged bee boxes
Final date for comments:
60 days from notification
Texts available from:
Rwanda Standards Board, Kigali, Rwanda, [email protected]
Note:
Year
Topic:
Hydronic heating systems
Document Type:
Technical specification
Target Audience:
Contractors, engineers
Year:
2011
Region / city:
United States
Topic:
Weights and measures standards
Document type:
Handbook
Institution:
National Conference on Weights and Measures (NCWM)
Author:
NCWM
Target audience:
Weights and measures officials, regulatory bodies, industry manufacturers
Period of validity:
2011
Approval date:
Not specified
Amendment date:
Not specified
Year:
2025
Title:
NIST Handbook 133: Checking the Net Content of Packaged Goods
Issuing Organization:
National Council on Weights and Measures (NCWM)
Supporting Organization:
National Institute of Standards and Technology (NIST)
Adoption Body:
National Council on Weights and Measures (NCWM)
Adoption Date:
July 2025 Annual Meeting
Corporate Name Change Effective:
August 13, 2024
Amendments:
Amended 2019 and 2024
Introduction Added:
2015
Subject:
Compliance testing of net content statements on packaged goods
Measurement Systems Referenced:
International System of Units (SI); U.S. customary units
Legal References:
Metric Conversion Act of 1975; Public Law 100-418; Federal Fair Packaging and Labeling Act (FPLA); 15 U.S.C. 205
Primary Audience:
Government officials; weights and measures agencies
Secondary Audience:
Commercial and industrial establishments packaging, distributing, and selling commodities
Enforcement Effective Date:
January 1 of the year following adoption unless otherwise specified
Publication Policy:
New edition issued after significant changes; minor amendments published as notices
Year:
2023
Region / City:
Not specified
Subject:
Cooling Towers
Document Type:
Technical Specification
Organization / Institution:
Not specified
Author:
Not specified
Target Audience:
Contractors, Engineers
Period of Validity:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Document Section:
Appendix A
Amendment Year:
2018
Jurisdiction:
United States
Subject:
Package regulations and net quantity compliance requirements
Document Type:
Regulatory tables and sampling plans
Responsible Agencies:
U.S. Department of Agriculture; U.S. Food and Drug Administration; Federal Trade Commission; Alcohol and Tobacco Tax and Trade Bureau; U.S. Environmental Protection Agency; State and local weights and measures authorities
Referenced Standard:
NIST Handbook 133
Commodities Covered:
Meat; Poultry; Siluriformes; Foods; Drugs; Cosmetics; Tobacco; Alcohol Products; Pesticides; Non-food Consumer Products
Key Provisions:
Sampling Plans for Category A and Category B; Maximum Allowable Variations (MAVs); Tare Sample Determination; Exceptions to MAVs
Application Scope:
Inspection lots and packaged goods in commerce
Year:
2026
Location:
Geraldton Port, Western Australia
Subject:
Bulk minerals loading operations
Document Type:
Operational Procedure
Issuing Authority:
Mid West Ports Authority (MWPA)
Author:
MWPA Operations Department
Intended Audience:
Licensed stevedores and port operational staff
Period of Application:
Ongoing during port operations
Approval Date:
2026
Related Legislation/Regulation:
MWPA Environmental Licence L4275/1982/15; Department of Water and Environmental Regulation guidelines
Associated Documents:
Traffic Management Procedure – Geraldton Port; Wharf Specification Booklet; MWPA HSEQ induction materials
Attachments:
MWPA Dust Monitoring Stations, MWPA Wind Loading Limits
Key Topics:
Pre-shipment storage, transport, shiploading methods, dust management, air quality monitoring, wind limits, simultaneous loading, odour control, radiation management, hazardous substances, occupational exposure, PPE, vessel trimming, waste handling, monitoring and review
Year:
2023
Region / City:
United States
Subject:
Plumbing, Domestic Water Systems
Document Type:
Technical Specification
Organization / Institution:
Goulds Water Technology
Author:
Not specified
Target Audience:
Engineers, Contractors, Facility Managers
Standards Referenced:
AWWA, ANSI, ASTM, HI, ASME, UL, ISO, NEMA, ETL, CSA, NEC, IEC, NSF, ASHRAE
Period of Validity:
Current installation projects
Approval Date:
Not specified
Amendment Date:
Not specified
System Capacity:
Variable, project-specific (GPM and PSI as indicated)
Materials:
304 stainless steel piping
Certification:
NSF/ANSI 61, UL/cUL QCZJ and UL 508A
Testing:
Factory tested, job-specific conditions
Year:
2026
Region / City:
Waikato
Document Type:
Compliance Schedule Form
Organization / Authority:
Waikato District Council
Intended Audience:
Building consent applicants and IQPs
System Type:
Automatic Doors (sliding and revolving)
Standards Referenced:
NZS 4239:1993, AS 4085:1992, AS 5007:2007, AS 4290:2000
Inspections Frequency:
Daily, Monthly, Annually
Maintenance Requirements:
Belt/chain tension adjustment, brake settings, wheel maintenance, battery recharge
Reporting Requirements:
On-Site Logbook and annual Form 12A submission
Note:
Year
Region / City:
Ontario
Subject:
Family Law
Document Type:
Court Order
Authority / Institution:
Ontario Court
Target Audience:
Legal parties involved in family law cases
Registered Entity:
Registered name of entity being audited
NCR Number:
NCRnnnnn
Compliance Enforcement Authority:
Region or NERC performing audit
Compliance Assessment Date(s):
Month DD, YYYY, to Month DD, YYYY
Compliance Monitoring Method:
[On-site Audit | Off-site Audit | Spot Check]
Names of Auditors:
Supplied by CEA
Applicability of Requirements:
BA, DP, GO, GOP, PA/PC, RC, RP, RSG, TO, TOP, TP, TSP
Requirements Covered:
D.B.1, D.B.2, D.B.3, D.B.4, R6, R7, R8, R9, R10, D.B.11, D.B.12
UFLS Entities Definition:
Distribution Providers, UFLS-Only Distribution Providers, Transmission Owners, and Transmission Owners that own Elements identified in the UFLS program
Supporting Evidence:
Compliance narratives, reports, memorandums, emails, and other documentation demonstrating compliance with PRC-006-5 requirements
Subject Matter Experts:
SME Name, Title, Organization, Requirement(s)
Compliance Assessment Approach:
Verification of joint regional review participation, island identification, and UFLS program adoption within Western Interconnection
Time Horizon:
Long-term Planning
VRF Level:
Medium
Year:
2024
Region / City:
Utrecht
Topic:
Literary translation, machine translation, translation quality assessment
Document Type:
Thesis
Organization / Institution:
Universiteit Utrecht
Author:
Lola van Scharrenburg
Target Audience:
Academic community, translation professionals
Period of Validity:
N/A
Date of Approval:
May 2024
Date of Changes:
N/A
Year:
2026
Region / City:
Longview, TX
Subject:
Utility Billing, Automatic Bank Draft
Document Type:
Agreement
Organization / Institution:
City of Longview Utility Billing Services
Author:
City of Longview
Target Audience:
Utility customers in Longview
Effective Period:
Ongoing
Approval Date:
Not specified
Amendment Date:
Not specified
Context:
A form that allows residents of Longview, TX to sign up for automatic bank draft payments for utility services, with detailed instructions for completing and submitting the agreement.
Year:
2011
Region / City:
Not specified
Topic:
Automatic planning of kanban jobs
Document type:
Concept Paper
Organization / Institution:
Microsoft
Author:
Not specified
Target audience:
Users of Microsoft Dynamics AX 2012
Period of validity:
Not specified
Approval date:
Not specified
Modification date:
Not specified
Note:
Contextual description
Year:
Not specified
Region / City:
Not specified
Topic:
Automatic entrances
Document Type:
Specification
Organization / Institution:
Stanley Access Technologies
Author:
Not specified
Target Audience:
Specifiers, contractors
Effective Period:
Not specified
Approval Date:
Not specified
Amendment Date:
Not specified
Note:
Year
Context:
Instructions for filing a motion to reinstate the automatic stay in bankruptcy cases in the U.S. Bankruptcy Court, District of New Jersey.